NEWLY DEVELOPED Al-Si BASED ALLOY FOR HIGH TEMPERATURE PROCESSES IN AUTOMOTIVE

被引：0
作者：
Cais, Jaromir [1 ]
Caisova, Klara [1 ]
机构：
[1] UJEP Jan Evangelista Purkyne Univ, Usti Nad Labem, Czech Republic
来源：
29TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2020) | 2020年
关键词：
Aluminum alloys; chemical composition; heat treatment; automotive forms; SOLUTION HEAT-TREATMENT; MECHANICAL-PROPERTIES; MICROSTRUCTURE; PHASE; MG;
D O I：
10.37904/metal.2020.3582
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Silumins (Al-Si alloys) are the most used type of aluminum foundry alloys used in the automotive. Their significant expansion is result of unique properties combination. The requirements of current automotive industry bring demands for high mechanical properties of silumins (mostly by high temperature processes, which decrease properties of aluminum alloys). One area of application where silumins replace the Fe based alloys are forms for tires pressing. Working temperature during this casting process is 160-180 degrees C, but nowadays trends for rubber vulcanization in tires production increase working temperature over 200 degrees C. Ordinary aluminum alloys lose their mechanical properties at this temperature. The article describes results of research of newly developed alloy applied for tire pressing forms. This research was subsequently widened by heat treatment being applied to this alloy. Both of these material characteristics (chemical composition and heat treatment) preserve its mechanical properties even when being exposed to high temperature processes.
引用
收藏
页码：1181 / 1186
页数：6
相关论文
共 50 条
[31]   Super-gravity field assisted homogeneous distribution of sub-micron eutectic Si in Al-Si alloy [J].
Gan, Zhanghua ;
Wu, Hao ;
Sun, Yao ;
Jiang, Panhui ;
Su, Yin ;
Wu, Chuandong ;
Liu, Jing .
JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 817
[32]   Compressive flow behavior of Al-Si based alloy: Role of heat treatment [J].
Joseph, Sudha ;
Kumar, S. ;
Babu, R. Prasath .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 629 :41-53
[33]   Deformation behavior of Al-Si alloy based nanocomposites reinforced with carbon nanotubes [J].
Choi, H. J. ;
Shin, J. H. ;
Min, B. H. ;
Bae, D. H. .
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2010, 41 (02) :327-329
[34]   Nanocrystalline eutectic Al-Si alloy produced by cryomilling [J].
Milligan, J. ;
Vintila, R. ;
Brochu, M. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 508 (1-2) :43-49
[35]   The effect of Ca and P interaction on the Al-Si eutectic in a hypoeutectic Al-Si alloy [J].
Ludwig, T. H. ;
Daehlen, E. Schonhovd ;
Schaffer, P. L. ;
Arnberg, L. .
JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 586 :180-190
[36]   Eutectic Al-Si piston alloy surface transformed to modified hypereutectic alloy via FSP [J].
Tutunchilar, S. ;
Givi, M. K. Besharati ;
Haghpanahi, M. ;
Asadi, P. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 534 :557-567
[37]   Effect of in-situ formation of AlP on solidification of hypereutectic Al-Si alloy [J].
Chen, Shuying ;
Zhang, Lei ;
Yue, Xudong ;
Chang, Guowei .
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2019, 110 (11) :1066-1073
[38]   An Improved Process for Solving the Sintering Problem of Al-Si Alloy Powder Metallurgy [J].
Tian, Hexin ;
Zhao, Fachang ;
Ma, Dongmei ;
Zhao, Xingming ;
Meng, Jingran ;
Zhang, Guangan ;
Wu, Fufa .
METALS, 2024, 14 (11)
[39]   Effect of Cr content and heat-treatment on the high temperature strength of eutectic Al-Si alloys [J].
Yang, Yuying ;
Zhong, Sheng-Yi ;
Chen, Zhe ;
Wang, Mingliang ;
Ma, Naiheng ;
Wang, Haowei .
JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 647 :63-69
[40]   Manufacturing of high-toughness Al-Si alloy by rolling and friction stir processing: Effect of traverse speed [J].
Soleymanpour, Mehdi ;
Aval, Hamed Jamshidi ;
Jamaati, Roohollah .
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2022, 37 :19-36
12345