Comprehensive Analysis of Oxidized Waxes by Solvent and Thermal Gradient Interaction Chromatography and Two-Dimensional Liquid Chromatography

This report addresses the comprehensive analysis of oxidized/functionalized polyethylene waxes according to chemical composition and molar mass by selective chromatographic methods. For the first time, tailored high-temperature interaction chromatography in solvent gradient (HT-SGIC) and thermal gradient (HT-TGIC) modes are used for the chemical composition separation of these materials. Separation protocols are developed using three model wax samples with different degrees of oxidation. For the chromatographic separations polar silica gel is used as the stationary phase. Solvent gradients of decane and cyclohexanone are used in HT-SGIC at 110 degrees C to separate the bulk waxes into several heterogeneous fractions according to polarity and the type of functionality. Column temperature and gradient manipulation are shown to influence chromatographic resolution and retention. The HT-SGIC investigations are complemented by HT-TGIC separations where a solvent mixture of decane and cyclohexanone is used as the mobile phase in isocratic mode. It is shown that HT-SGIC and HT-TGIC provide different types of separation, however, both are predominantly based on differences in functionality. To provide comprehensive information on chemical composition (functionality) and molar mass, HT-SGIC and HT-TGIC are coupled to HT-SEC, using ortho-dichlorobenzene as the second dimension mobile phase. Clear differences between oxidized and nonoxidized waxes are detected in HT-2D-LC providing comprehensive information on the molecular heterogeneity of these materials.