High-cycle fatigue properties of beta Ti alloy 55Ti-30Nb-10Ta-5Zr, gum metal

被引：4
作者：
Akita, M. [1 ]
Nakajima, M. [2 ]
Uematsu, Y. [3 ]
Tokaji, K. [3 ]
Kojima, T. [4 ]
机构：
[1] Gifu Univ, Fac Engn, Gifu 5011193, Japan
[2] Toyota Natl Coll Technol, Dept Mech Engn, Toyota 4718525, Japan
[3] Gifu Univ, Dept Mech Engn, Gifu 5011193, Japan
[4] Okuma Corp LTD, Oguchi, Aichi 4800193, Japan
来源：
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES | 2014年 / 37卷 / 11期
关键词：
beta titanium alloy; corrosion fatigue; crack growth; crack initiation; fatigue; slip deformation; S-N diagram; PLASTIC-DEFORMATION; TITANIUM; MECHANISM; BEHAVIOR; EVOLUTION;
D O I：
10.1111/ffe.12201
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This paper describes the fatigue properties of the beta titanium alloy 55Ti-30Nb-10Ta-5Zr, generally referred to as 'Gum Metal'. Rotating bending fatigue tests have been performed in laboratory air and in a 3% NaCl aqueous solution. The results obtained were compared with those of a conventional beta titanium alloy, Ti-22V-4Al. In tensile tests, 55Ti-30Nb-10Ta-5Zr indicated elasticity and microplasticity in the elastic region. Thus, the elastic modulus slightly decreased with an increasing strain, and the work hardening was minimal during plastic deformation. The mechanical properties of both of the alloys were comparable. The fatigue strength of 55Ti-30Nb-10Ta-5Zr in laboratory air was higher than that of Ti-22V-4Al, which could be attributed to the higher fatigue crack initiation resistance of 55Ti-30Nb-10Ta-5Zr than Ti-22V-4Al, while the resistance to small fatigue crack growth was similar. The fatigue strength of 55Ti-30Nb-10Ta-5Zr in laboratory air and in the 3% NaCl aqueous solution was analogous. In addition, corrosion pits were not observed in the run-out specimen in the 3% NaCl aqueous solution, indicating a high resistance of 55Ti-30Nb-10Ta-5Zr against corrosion fatigue.
引用
收藏
页码：1223 / 1231
页数：9
相关论文
共 50 条
  • [31] Evaluation of Microstructure and Mechanical Properties of Thermomechanically Processed β Ti-35Nb-7Zr-5Ta Alloy
    Pourghasemi, Behzad
    Abouei, Vahid
    Bayat, Omid
    Ravari, Banafsheh Karbakhsh
    IRANIAN JOURNAL OF MATERIALS SCIENCE AND ENGINEERING, 2022, 19 (03)
  • [32] Prediction of high-cycle fatigue strength in a Ti-17 alloy blade after foreign object damage
    Zhao, Zhenhua
    Wang, Lingfeng
    Zhang, Junhe
    Liu, Lulu
    Chen, Wei
    ENGINEERING FRACTURE MECHANICS, 2021, 241
  • [33] Influence of single and double aging treatment on microstructures and mechanical properties of cold rolled Ti-30Nb-5Ta-6Zr alloy
    Wang, Y.
    Dai, S.
    Chen, F.
    Yu, X.
    Zhang, Y.
    MATERIALS SCIENCE AND TECHNOLOGY, 2014, 30 (02) : 189 - 195
  • [34] Influence of Microstructure Homogeneity on High-Cycle Fatigue Crack Initiation of Ti-55531 Alloy with Lamellar Microstructure
    Huang Chaowen
    Zhao Yongqing
    Xin Shewei
    Zhou Wei
    Li Qian
    Zeng Weidong
    RARE METAL MATERIALS AND ENGINEERING, 2017, 46 (03) : 663 - 668
  • [35] High-Cycle Fatigue Behavior of Ti-5Al-2.5Sn ELI Alloy Forging at Low Temperatures
    Ono, Yoshinori
    Yuri, Tetsumi
    Ogata, Toshio
    Demura, Masahiko
    Matsuoka, Saburo
    Sunakawa, Hideo
    ADVANCES IN CRYOGENIC ENGINEERING, VOL 60, 2014, 1574 : 340 - 345
  • [36] Effects of cold-rolling deformation on texture evolution and mechanical properties of Ti-29Nb-9Ta-10Zr alloy
    Cojocaru, V. D.
    Raducanu, D.
    Gloriant, T.
    Gordin, D. M.
    Cinca, I.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 586 : 1 - 10
  • [37] Investigation of static properties of medical alloys Ti-(20-30)Nb-(10-13)Ta-5Zr
    Sergienko, K. V.
    Sevost'yanov, M. A.
    Konushkin, S. V.
    Nasakina, E. O.
    Baikin, A. S.
    Shatova, L. A.
    Kolmakov, A. G.
    THIRD INTERNATIONAL YOUTH SCIENTIFIC FORUM WITH INTERNATIONAL PARTICIPATION NEW MATERIALS, 2018, 347
  • [38] Microstructural softening induced adiabatic shear banding in Ti-23Nb-0.7Ta-2Zr-O gum metal
    Liu, Silu
    Guo, Y. Z.
    Pan, Z. L.
    Liao, X. Z.
    Lavernia, E. J.
    Zhu, Y. T.
    Wei, Q. M.
    Zhao, Yonghao
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2020, 54 : 31 - 39
  • [39] A novel Ti42.5Zr42.5Nb5Ta10 multi-principal element alloy with excellent properties for biomedical applications
    Li, Zheng
    Lai, Weiji
    Wang, Binbin
    Tong, Xin
    You, Deqiang
    Li, Wei
    Wang, Xiaojian
    INTERMETALLICS, 2022, 151
  • [40] Characterization of biomedical Ti-35Nb-5Ta-7Zr alloy prepared by powder metallurgy route
    Hayyawi, Ahmed Rabeea
    Al-Ethari, Haydar
    Haleem, Ali Hubi
    CANADIAN METALLURGICAL QUARTERLY, 2024,
12345