Visualization of Microstructural Factor Resisting the Cleavage-Crack Propagation in the Simulated Heat-Affected Zone of Bainitic Steel

被引：5

作者：

Terasaki, Hidenori ^{[1
]}

Miyahara, Yu ^{[1
]}

Ohata, Mitsuru ^{[2
]}

Moriguchi, Koji ^{[3
]}

Tomio, Yusaku ^{[3
]}

Hayashi, Kotaro ^{[3
]}

机构：

[1] Kumamoto Univ, Grad Sch Sci & Engn, Kumamoto 8608555, Japan

[2] Osaka Univ, Grad Sch Engn, Osaka, Japan

[3] Nippon Steel & Sumitomo Met Corp, Tech Res & Dev Bur, Tokyo, Japan

来源：

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | 2015年 / 46A卷 / 12期

关键词：

ELECTRON BACKSCATTERING DIFFRACTION; LOW-CARBON STEEL; LOW-ALLOY STEEL; FE-C ALLOYS; MARTENSITE; FRACTURE; TRANSFORMATION; MORPHOLOGY; AUSTENITE; FERRITE;

D O I：

10.1007/s11661-015-3167-y

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Cleavage-crack propagation behavior was investigated in the simulated coarse-grained heat-affected zone (CGHAZ) of bainitic steel using electron backscattering diffraction (EBSD) pattern analysis when a low heat input welding was simulated. From viewpoint of crystallographic analysis, it was the condition in which the Bain zone was smaller than the close-packed plane (CP) group. It was clarified that the Bain zone and CP group boundaries provided crack-propagation resistance. The results revealed that when the Bain zone was smaller than the CP group, crack length was about one quarter the size of that measured when the CP group was smaller than the Bain zone because of the increasing Bain-zone boundaries. Furthermore, it was clarified that the plastic work associated with crack opening and resistance at the Bain and CP boundaries could be visualized by the kernel average misorientation maps. (C) The Minerals, Metals & Materials Society and ASM International 2015

引用

页码：5489 / 5493

页数：5

共 18 条

[1] Brozzo P., 1977, Metal Science, V11, P123
[2] Electron backscattering diffraction study of acicular ferrite, bainite, and martensite steel microstructures
Gourgues, AF
Flower, HM
Lindley, TC
[J]. MATERIALS SCIENCE AND TECHNOLOGY, 2000, 16 (01) : 26 - 40
[3] Electron backscatter diffraction and cracking
Gourgues, AF
[J]. MATERIALS SCIENCE AND TECHNOLOGY, 2002, 18 (02) : 119 - 133
[4] Griffith A. A., 1921, METALL MATER TRANS A, P163
[5] Application of acoustic emission to the study of cleavage fracture mechanism in a HSLA steel
Lambert, A
Garat, X
Sturel, T
Gourgues, AF
Gingell, A
[J]. SCRIPTA MATERIALIA, 2000, 43 (02) : 161 - 166
[6] Austenite to bainite phase transformation in the heat-affected zone of a high strength low alloy steel
Lambert-Perlade, A
Gourgues, AF
Pineau, A
[J]. ACTA MATERIALIA, 2004, 52 (08) : 2337 - 2348
[7] Mechanisms and modeling of cleavage fracture in simulated heat-affected zone microstructures of a high-strength low alloy steel
Lambert-Perlade A.
Gourgues A.F.
Besson J.
Sturel T.
Pineau A.
[J]. Metallurgical and Materials Transactions A, 2004, 35 (13) : 1039 - 1053
[8] Characterization of coarse bainite transformation in low carbon steel during simulated welding thermal cycles
Lan, Liangyun
Kong, Xiangwei
Qiu, Chunlin
[J]. MATERIALS CHARACTERIZATION, 2015, 105 : 95 - 103
[9] EBSD characterization of secondary microcracks in the heat affected zone of a X100 pipeline steel weld joint
Li, Xueda
Ma, Xiaoping
Subramanian, S. V.
Shang, Chengjia
[J]. INTERNATIONAL JOURNAL OF FRACTURE, 2015, 193 (02) : 131 - 139
[10] Effect of morphology of martensite-austenite phase on fracture of weld heat affected zone in vanadium and niobium microalloyed steels
Li, Y.
Baker, T. N.
[J]. MATERIALS SCIENCE AND TECHNOLOGY, 2010, 26 (09) : 1029 - 1040

← 1 2 →