Experimental evaluation of the Wyoming-modified two-rail shear test method for composite materials

被引:6
作者
Hussain, AK [1 ]
Adams, DF
机构
[1] Univ Teknol MARA, Shah Alam, Malaysia
[2] Univ Wyoming, Composite Mat Res Grp, Laramie, WY 82071 USA
[3] Wyoming Test Fixtures Inc, Laramie, WY USA
关键词
test methods; rail shear test; shear properties; composite materials;
D O I
10.1177/0014485104044317
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In-plane unidirectional shear properties of carbon/epoxy and glass/epoxy materials were measured using unidirectional and cross-ply specimens utilizing the Wyoming-modified two-rail shear test fixture. Simple test specimens of trapezoidal and rectangular geometries, and specimens with tabs were tested. Various specimen aspect ratios were also considered. Untabbed unidirectional specimens exhibited premature shear failures but cross-ply specimens produced reasonably reliable results with acceptable failure modes. Both bonded tab and integral tab 00 specimens were found to give comparable results. Unidirectional and cross-ply PEEK specimens, and angle-ply and quasi-isotropic AS4/3501-6 specimens, were also tested.
引用
收藏
页码:354 / 364
页数:11
相关论文
共 21 条
[1]  
ADAMS DF, 1994, SAMPE J, V31, P32
[2]  
*ASTM, 2001, D425501 ASTM
[3]  
*ASTM, 2000, D351894 ASTM
[4]  
*ASTM, 1998, D537998 ASTM
[5]  
BERGER HW, 1977, VPIE7714 FIRG POL I
[6]  
BLACK JB, 1987, P 32 INT SAMPE S APR, P360
[7]  
BUTLER RJ, 1988, ASTM STP, V972, P227
[8]   THE EFFECT OF LAMINATE CONFIGURATION ON CHARACTERISTIC LENGTHS AND RAIL SHEAR-STRENGTH [J].
CHANG, FK ;
SCOTT, RA ;
SPRINGER, GS .
JOURNAL OF COMPOSITE MATERIALS, 1984, 18 (03) :290-296
[9]   THE INSITU PLY SHEARSTRENGTH DISTRIBUTIONS IN GRAPHITE - EPOXY LAMINATED COMPOSITES [J].
CHANG, FK ;
CHEN, MH .
JOURNAL OF COMPOSITE MATERIALS, 1987, 21 (08) :708-733
[10]   THE EFFECT OF TESTING METHODS ON THE SHEAR-STRENGTH DISTRIBUTION IN LAMINATED COMPOSITES [J].
CHANG, FK ;
TANG, JM ;
PETERSON, DG .
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 1987, 6 (04) :304-318