Inductance Calculation of Tooth-Coil Permanent-Magnet Synchronous Machines

被引：58

作者：

Ponomarev, Pavel ^{[1
]}

Alexandrova, Yulia ^{[1
]}

Petrov, Ilya ^{[1
]}

Lindh, Pia ^{[1
]}

Lomonova, Elena ^{[2
]}

Pyrhonen, Juha ^{[1
]}

机构：

[1] Lappeenranta Univ Technol, Lab Elect Drives Technol, Lappeenranta 53850, Finland

[2] Eindhoven Univ Technol, Dept Elect Engn, NL-5600 Eindhoven, Netherlands

来源：

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS | 2014年 / 61卷 / 11期

关键词：

Fractional slot winding; inductance calculation leakage inductance; permanent-magnet synchronous machine (PMSM); tooth coil; PERFORMANCE;

D O I：

10.1109/TIE.2014.2304933

中图分类号：

TP [自动化技术、计算机技术];

学科分类号：

0812 ;

摘要：

Analytical calculation methods for all the major components of the synchronous inductance of tooth-coil permanent-magnet synchronous machines are reevaluated in this paper. The inductance estimation is different in the tooth-coil machine compared with the one in the traditional rotating field winding machine. The accuracy of the analytical torque calculation highly depends on the estimated synchronous inductance. Despite powerful finite element method (FEM) tools, an accurate and fast analytical method is required at an early design stage to find an initial machine design structure with the desired performance. The results of the analytical inductance calculation are verified and assessed in terms of accuracy with the FEM simulation results and with the prototype measurement results.

引用

页码：5966 / 5973

页数：8

共 29 条

[1] Impact of the Rotor Yoke Geometry on Rotor Losses in Permanent-Magnet Machines [J].

Alberti, Luigi ;

Fornasiero, Emanuele ;

Bianchi, Nicola .

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2012, 48 (01) :98-105

[2]

[Anonymous], BERECHNUNGELEKTRISCH

[3]

[Anonymous], 1974, ELECT MACHINES

[4]

[Anonymous], IEC600271

[5]

[Anonymous], ELEKTRISCHE MASCHINE

[6]

Barcaro M, 2012, 2012 XXTH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES (ICEM), P1496, DOI 10.1109/ICElMach.2012.6350076

[7] Design considerations for fractional-slot winding configurations of synchronous machines [J].

Bianchi, Nicola ;

Bolognani, Silverio ;

Pre, Michele Dai ;

Grezzani, Giorgio .

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2006, 42 (04) :997-1006

[8]

Chevailler S., 2007, 2007 European Conference on Power Electronics and Applications, P1, DOI 10.1109/EPE.2007.4417416

[9] Synthesis of high performance PM motors with concentrated windings [J].

Cros, M ;

Viarouge, P .

IEEE TRANSACTIONS ON ENERGY CONVERSION, 2002, 17 (02) :248-253

[10]

Dajaku G, 2012, 2012 XXTH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES (ICEM), P36, DOI 10.1109/ICElMach.2012.6349835

← 1 2 3 →