Reactive extrusion of polypropylene with pulsed peroxide addition: Process and control aspects

被引：21

作者：

Dickson, SB ^{[1
]}

Tzoganakis, C ^{[1
]}

Budman, H ^{[1
]}

机构：

[1] UNIV WATERLOO,DEPT CHEM ENGN,WATERLOO,ON N2L 3G1,CANADA

来源：

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH | 1997年 / 36卷 / 04期

关键词：

D O I：

10.1021/ie960288u

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

Controlled-theology polypropylenes (CRPPs) have been produced by using pulsed peroxide addition during reactive extrusion of a commodity resin. It has been shown that, in contrast with processes involving continuous peroxide addition, it is possible to independently vary the weight-average molecular weight (<(M)over bar (w)>) and polydispersity (PDI). The effects of peroxide pulse characteristics on the product molecular weight characteristics have been investigated using the rheological properties of the CRPPs produced, and it has been found that the pulse width, amplitude, and period provide extra degrees of freedom for controlling <(M)over bar (w)> and PDI. A simple kinetic model has been employed for process simulation, and model predictions have been used to rationalize the control options through a relative gain array (RGA) analysis of the process. The results from this analysis have shown that such reactive extrusion operations are highly nonlinear and that multivariable control strategies would be required for large operating windows.

引用

页码：1067 / 1075

页数：9

共 18 条

[1] BABBA K, 1975, Patent No. 3887534
[2] Barakos G, 1996, J APPL POLYM SCI, V59, P543
[3] DAVISON S, 1986, Patent No. 4578430
[4] Fritz H. G., 1986, INT POLYM PROCESS, V1, P31, DOI DOI 10.1515/217.860031
[5] MONTE-CARLO SIMULATION OF PEROXIDE INITIATED DEGRADATION OF POLYPROPYLENE
HUANG, C
TZOGANAKIS, C
DUEVER, TA
[J]. POLYMER REACTION ENGINEERING, 1995, 3 (01): : 43 - 63
[6] CONTROLLED RHEOLOGY POLYPROPYLENES - AN IMPROVED MODEL WITH EXPERIMENTAL VALIDATION FOR THE SINGLE-SCREW EXTRUDER PROCESS
KRELL, MJ
BRANDOLIN, A
VALLES, EM
[J]. POLYMER REACTION ENGINEERING, 1994, 2 (04): : 389 - 408
[7] RYU SH, 1992, ADV POLYM TECHNOL, V11, P121
[8] SEBORG DE, 1989, PROCESS DYNAMICS CON
[9] STEINKAMP RA, 1975, Patent No. 3862265
[10] REACTIVE EXTRUSION OF POLYPROPYLENE .1. CONTROLLED DEGRADATION
SUWANDA, D
LEW, R
BALKE, ST
[J]. JOURNAL OF APPLIED POLYMER SCIENCE, 1988, 35 (04) : 1019 - 1032

← 1 2 →