Microstructure evolution of cobalt aluminide coating on nickel-based superalloys during exposure at 1050 °C

被引:11
作者
Ren, Weipeng [1 ]
Xiao, Chengbo [1 ]
Li, Qing [1 ]
Song, Jinxia [1 ]
He, Limin [2 ]
Cao, Chunxiao [1 ]
机构
[1] Beijing Inst Aeronaut Mat, Sci & Technol Adv High Temp Struct Mat Lab, Beijing 100095, Peoples R China
[2] Beijing Inst Aeronaut Mat, Dept 5, Beijing 100095, Peoples R China
基金
国家高技术研究发展计划(863计划);
关键词
Microstructure evolution; Aluminide coating; Exposure; Interdiffusion; Precipitate; CYCLIC-OXIDATION BEHAVIOR; CMSX-4; SUPERALLOY; NIAL COATINGS; BOND COAT; INTERDIFFUSION; DEGRADATION; DEPOSITION; SERVICE;
D O I
10.1016/j.vacuum.2014.03.013
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Cobalt aluminide coating was deposited onto two directionally solidified Ni-based superalloys (DZ 466 and DS GTD111) by low-pressure chemical vapor deposition. Interdiffusion behaviors of the two coating/superalloy systems were examined during long-term thermal exposure at 1050 degrees C. It was observed that the inward diffusion of Al and Co from the coating to the substrate and the outward diffusion of Ni and refractory elements such as W, Ta and Cr etc. from the substrate occurred during annealing. This phenomenon induced the degradation of coating matrix and several precipitations of chromium containing phases. Degradation rate and precipitate categories are of great differences for the two studied superalloys. The initial precipitates presented in the coating system had a morphological heredity-effect (MHE) to the final Upsilon phase microstructure. Mechanism referred to elements distribution was discussed. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码:39 / 45
页数:7
相关论文
共 50 条
[41]   Microstructure evolution and formation mechanism of a crack-free nickel-based superalloy fabricated by laser engineered net shaping [J].
Shu, Zhongliang ;
Chen, Zhiguo ;
Wang, Li ;
Wei, Xiang ;
Li, Wenjie ;
Zheng, Ziqiao .
OPTICS AND LASER TECHNOLOGY, 2020, 128
[42]   Microstructure evolution of nickel-based superalloy with periodic thermal parameters during rotary tube piercing process [J].
Zhe Zhang ;
Dong Liu ;
Yanhui Yang ;
Jianguo Wang ;
Yong Zheng ;
Fuxiang Zhang .
The International Journal of Advanced Manufacturing Technology, 2019, 104 :3991-4006
[43]   Microstructure evolution of pre-compression nickel-based single crystal superalloy during tensile creep [J].
Yu Xingfu ;
Tian Sugui ;
Du Hongqing ;
Wang Minggang ;
Shang Lijuan ;
Cui Shusen .
ACTA METALLURGICA SINICA, 2008, 44 (08) :961-967
[44]   Microstructure evolution of nickel-based superalloy with periodic thermal parameters during rotary tube piercing process [J].
Zhang, Zhe ;
Liu, Dong ;
Yang, Yanhui ;
Wang, Jianguo ;
Zheng, Yong ;
Zhang, Fuxiang .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 104 (9-12) :3991-4006
[45]   Microstructure and oxidation behavior of Al plus Si co-deposited coatings on nickel-based superalloys [J].
Fu, C. ;
Kong, W. K. ;
Cao, G. H. .
SURFACE & COATINGS TECHNOLOGY, 2014, 258 :347-352
[46]   Microstructure and mechanical properties of laser-assisted epitaxial growth of nickel-based single crystal superalloys [J].
Xu, Jinjun ;
Liu, Jiayi ;
Yu, Lihong ;
Zhan, Yang ;
Gao, Kun ;
Zhou, Zhipeng ;
Huang, Lan ;
Lei, Qian .
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 24 :1910-1921
[47]   The Effect of Re Content on Microstructure and Creep Resistance of Single Crystal Castings Made of Nickel-Based Superalloys [J].
Gancarczyk, Kamil ;
Albrecht, Robert ;
Kawalec, Malgorzata ;
Koscielniak, Barbara ;
Gradzik, Andrzej ;
Szeliga, Dariusz ;
Kawalec, Andrzej ;
Ziaja, Waldemar ;
Motyka, Maciej .
ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2024, 18 (01) :291-305
[48]   Effect of zirconium addition on cyclic oxidation behavior of platinum-modified aluminide coating on nickel-based superalloy [J].
Hong, S. J. ;
Hwang, G. H. ;
Han, W. K. ;
Lee, K. S. ;
Kang, S. G. .
INTERMETALLICS, 2010, 18 (05) :864-870
[49]   Oxidation and Microstructure Evolution of CoAl Coating on Directionally Solidified Ni-Based Superalloys DZ466 [J].
Ren Weipeng ;
Li Qing ;
Huang Qiang ;
Xiao Chengbo ;
He Limin .
ACTA METALLURGICA SINICA, 2018, 54 (04) :566-574
[50]   MICROSTRUCTURE EVOLUTION AND FEM ANALYSIS OF [111] ORIENTED SINGLE CRYSTAL OF A NICKEL-BASED SUPERALLOY DURING TENSILE CREEP [J].
Zhang Shu ;
Tian Sugui ;
Yu Huichen ;
Yu Lili ;
Yu Xingfu .
ACTA METALLURGICA SINICA, 2012, 48 (05) :561-568