Microstructure evolution of cobalt aluminide coating on nickel-based superalloys during exposure at 1050 °C

被引:11
作者
Ren, Weipeng [1 ]
Xiao, Chengbo [1 ]
Li, Qing [1 ]
Song, Jinxia [1 ]
He, Limin [2 ]
Cao, Chunxiao [1 ]
机构
[1] Beijing Inst Aeronaut Mat, Sci & Technol Adv High Temp Struct Mat Lab, Beijing 100095, Peoples R China
[2] Beijing Inst Aeronaut Mat, Dept 5, Beijing 100095, Peoples R China
基金
国家高技术研究发展计划(863计划);
关键词
Microstructure evolution; Aluminide coating; Exposure; Interdiffusion; Precipitate; CYCLIC-OXIDATION BEHAVIOR; CMSX-4; SUPERALLOY; NIAL COATINGS; BOND COAT; INTERDIFFUSION; DEGRADATION; DEPOSITION; SERVICE;
D O I
10.1016/j.vacuum.2014.03.013
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Cobalt aluminide coating was deposited onto two directionally solidified Ni-based superalloys (DZ 466 and DS GTD111) by low-pressure chemical vapor deposition. Interdiffusion behaviors of the two coating/superalloy systems were examined during long-term thermal exposure at 1050 degrees C. It was observed that the inward diffusion of Al and Co from the coating to the substrate and the outward diffusion of Ni and refractory elements such as W, Ta and Cr etc. from the substrate occurred during annealing. This phenomenon induced the degradation of coating matrix and several precipitations of chromium containing phases. Degradation rate and precipitate categories are of great differences for the two studied superalloys. The initial precipitates presented in the coating system had a morphological heredity-effect (MHE) to the final Upsilon phase microstructure. Mechanism referred to elements distribution was discussed. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码:39 / 45
页数:7
相关论文
共 50 条
[31]   Creep behaviour at 760°C of two nickel-based single crystal superalloys [J].
Diologent, F ;
Caron, P .
THERMEC'2003, PTS 1-5, 2003, 426-4 :725-730
[32]   Effect of heat treatments on microstructure evolution and mechanical properties of blended nickel-based superalloys powders fabricated by laser powder deposition [J].
Tian, Y. ;
Gontcharov, A. ;
Gauvin, R. ;
Lowden, P. ;
Brochu, M. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 674 :646-657
[33]   Evolution of microstructure and ? phase in an aging-treated nickel-based superalloy during hot compression [J].
Yan, PeiZhi ;
Wen, DongXu ;
Liu, Yang ;
Huang, Liang ;
Yang, XiaoLi ;
Zhang, ZhiCheng ;
Xu, FuZe ;
Li, JianJun .
MATERIALS CHARACTERIZATION, 2023, 200
[34]   Microstructure Evolution of [001] orientation Single Crystal Nickel-Based Superalloy During Compression Creep [J].
Zhang Shu ;
Tian Sugui ;
Liang Fushui ;
Li Anan ;
Li Jingjing .
TMS2011 SUPPLEMENTAL PROCEEDINGS, VOL 2: MATERIALS FABRICATION, PROPERTIES, CHARACTERIZATION, AND MODELING, 2011, :427-434
[35]   Microstructure and Crystallographic Texture of Laser Additive Manufactured Nickel-Based Superalloys with Different Scanning Strategies [J].
Liu, Xingbo ;
Xiao, Hui ;
Xiao, Wenjia ;
Song, Lijun .
CRYSTALS, 2021, 11 (06)
[36]   Effect of Processing on Microstructure and Physical Properties of Three Nickel-Based Superalloys with Different Hardening Mechanisms [J].
Strondl, Annika ;
Milenkovic, Srdjan ;
Schneider, Andre ;
Klement, Uta ;
Frommeyer, Georg .
ADVANCED ENGINEERING MATERIALS, 2012, 14 (07) :427-438
[37]   Effect of Aluminide Coating Thickness on High-Temperature Fatigue Response of MAR-M247 Nickel-Based Superalloy [J].
Kopec, Mateusz .
COATINGS, 2024, 14 (08)
[38]   Development of a New Coating Compatible with Third-Generation Nickel-Based Superalloys and Thermal Barrier Coatings [J].
Saboundji, A. ;
Jaquet, V. ;
Suave, L. Mataveli ;
Rame, J. .
SUPERALLOYS 2020, 2020, :804-812
[39]   A review on cracking mechanism and suppression strategy of nickel-based superalloys during laser cladding [J].
Tan, Qin ;
Liu, Kun ;
Li, Jie ;
Geng, Shaoning ;
Sun, Liying ;
Skuratov, Vladimir .
JOURNAL OF ALLOYS AND COMPOUNDS, 2024, 1001
[40]   Evolution of hot processing map and microstructure of as-forged nickel-based superalloy during hot deformation [J].
Chen, Le ;
Zhang, Bing ;
Yang, Yan ;
Zhao, Tianli ;
Xu, Yi ;
Wang, Qi ;
Zan, Bin ;
Cai, Jun ;
Wang, Kuaishe ;
Chen, Xi .
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 24 :7638-7653