Micromechanical analysis of internal stress development during single-fibre fragmentation testing of Ti/SiCf

被引：14

作者：

Rauchs, G ^{[1
]}

Preuss, M ^{[1
]}

Withers, PJ ^{[1
]}

机构：

[1] Univ Manchester, Inst Sci & Technol, Ctr Mat Sci, Manchester M1 7HS, Lancs, England

来源：

ACTA MATERIALIA | 2002年 / 50卷 / 10期

基金：

英国工程与自然科学研究理事会;

关键词：

finite element modelling; fibre fragmentation; interface shear stress; X-ray diffraction;

D O I：

10.1016/S1359-6454(02)00068-X

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

An axisymmetric finite element model of a single fibre composite tensile specimen having a Ti-6Al-4V matrix reinforced with one SCS6 SiC fibre has been constructed. The sliding of the fibre is modelled using a constant critical shear stress and fibre fragmentation introduced using the element removal technique. In this way, the fibre and matrix strains have been computed as the fibre fractures progressively. The results are compared to synchrotron X-ray strain scanning measurements made in-situ during the test and critical interfacial parameters are extracted. Good agreement is found between numerical and experimental results based on a critical shear stress of 200 MPa for loading and unloading including both forward and reverse slip. (C) 2002 Acta Materialia Inc. Published by Elsevier Science Ltd. All rights reserved.

引用

页码：2477 / 2490

页数：14

共 22 条

[1] Elevated temperature interfacial behaviour of MMCs: A computational study [J].

Ananth, CR ;

Chandra, N .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 1996, 27 (09) :805-811

[2]

Barney C, 1998, MATER SCI TECH SER, V14, P658, DOI 10.1179/026708398790290550

[3] Characterization of internal damage in a MMCp using x-ray synchrotron phase contrast microtomography [J].

Buffière, JY ;

Maire, E ;

Cloetens, P ;

Lormand, G ;

Fougères, R .

ACTA MATERIALIA, 1999, 47 (05) :1613-1625

[4]

CLYNE TW, 1993, INTRO METAL MATRIX C, P470

[5] Finite element modelling of the push-out test for SiC fibre-reinforced titanium alloys [J].

Dinter, J ;

Peters, PWM ;

Hemptenmacher, J .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 1996, 27 (09) :749-753

[6]

*HIBB KARLS SOR, 1999, ABAQUS US MAN VERS 5

[7] TENSILE PROPERTIES OF FIBRE-REINFORCED METALS - COPPER/TUNGSTEN AND COPPER/MOLYBDENUM [J].

KELLY, A ;

TYSON, WR .

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 1965, 13 (06) :329-&

[8]

KIESCHKE RR, 1990, FUNDAMENTAL RELATIONSHIPS BETWEEN MICROSTRUCTURES AND MECHANICAL PROPERTIES OF METAL MATRIX COMPOSITES, P325

[9] MODELING OF CRITICAL FIBER LENGTH AND INTERFACIAL DEBONDING IN THE FRAGMENTATION TESTING OF POLYMER COMPOSITES [J].

LACROIX, T ;

TILMANS, B ;

KEUNINGS, R ;

DESAEGER, M ;

VERPOEST, I .

COMPOSITES SCIENCE AND TECHNOLOGY, 1992, 43 (04) :379-387

[10]

LEPETITCORPS Y, 1989, COMP SCI TECH, V35, P295

← 1 2 3 →