A version of the Trasco Intense Proton Source optimized for accelerator driven system purposes

A full set of measurements of the magnetic field has been carried out to define a different design of the TRASCO Intense Proton Source (TRIPS) magnetic system, based on permanent magnets, in order to increase the reliability of the source. The two coils of the source generate a maximum field of 150 mT and the optimum field was determined around 95 mT. The OPERA-3D package was used to simulate the magnetic field and a new magnetic system was designed as a combination of three rings of NdFeB magnets and soft iron. The high voltage insulation has been completely modified, in order to avoid any electronics at 80 kV voltage. The description of the magnetic measurements and the comparison with the simulations are presented, along with the mechanical design of the new version permanent magnet TRIPS (PM-TRIPS) and the new design of the extraction system. Finally the modification of the low energy beam transfer line (LEBT), which now includes a 30degrees bending magnet, will be outlined, with special regard to the accelerator availability improvement which can be obtained with the installation of two PM-TRIPS sources or more on the LEBT. (C) 2004 American Institute of Physics.