A Converter with Automatic Stage Transition Control for Inductive Power Transfer

An automatic stage transition converter for an inductive power transfer system is presented in this paper. An effective control strategy with two working stages of independent energy injection stage and free resonance stage is employed in the proposed converter. With the automatic stage transition strategy, when the frequency of the resonance network changes, the ending time of the free resonance stage is automatically determined. At the same time, the phase angle of the free resonance stage is automatically set as half a resonant cycle. As the stage transition is not triggered by the switches, the switch motion can be executed in advance of the transition moments. Time margins are offered for every switch in the converter, which make the switching moments of the switches flexible and the control simple. Another feature of this converter is that during the energy injection stage, the energy is injected into the inductor independently. Therefore, the input power can be easily regulated by adjusting the energy injection time. A prototype for the converter and the inductive power transfer system was implemented experimentally. From the experimental results, the automatic stage transition and power regulation capability of the proposed converter are verified. The switches all operated at the soft switch condition. When the energy injection time was adjusted from 10 mu s to 25 mu s, the output power changed from 143 W to 740 W.