Press formability of AZ31 magnesium alloy sheets produced by equal channel angular rolling

被引：6

作者：

Chen, Z. H. ^{[1
]}

Cheng, Y. Q. ^{[1
]}

Xia, W. J. ^{[1
]}

Zhou, T. ^{[1
]}

机构：

[1] Hunan Univ, Sch Mat Sci & Engn, Changsha 410082, Peoples R China

来源：

MATERIALS TECHNOLOGY | 2006年 / 21卷 / 03期

关键词：

D O I：

10.1179/mte.2006.21.3.148

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A study was conducted to demonstrate the use of an equal channel angular rolling (ECAR) process to produce AZ31 magnesium alloy sheets with a changed texture and improved ductility. The study was carried out to investigate the press formability for AZ31 magnesium alloy sheet produced by ECAR at room temperature and was compared with that of the normally rolled sheet. The as-received sheets of AZ31 magnesium alloy of 800×120×1.9 mm were prepared by unidirectional hot rolling for the investigations. The sheets were heated at 623K for 3min, and then rolled in the ECAR device with an ECAR mould having an oblique angle of 115°, an oblique an oblique radim (r) of 2mm and a channel height (H) of 1.8mm. The strain during ECAR was simulated by means of a rigid-plastic finite element method (FEM) code DEFORM-2D. The FEM simulation showed the deformation at the comer of mold channel during one pass of ECAR.

引用

页码：148 / 150

页数：3

共 18 条

[1] Enhanced ductility in strongly textured magnesium produced by equal channel angular processing [J].

Agnew, SR ;

Horton, JA ;

Lillo, TM ;

Brown, DW .

SCRIPTA MATERIALIA, 2004, 50 (03) :377-381

[2] Deformation microstructures and textures of some cold rolled Mg alloys [J].

Barnett, MR ;

Nave, MD ;

Bettles, CJ .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 386 (1-2) :205-211

[3] Formability of stamping magnesium-alloy AZ31 sheets [J].

Chen, FK ;

Huang, TB .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 142 (03) :643-647

[4] Sheet metal forming of magnesium wrought alloys -: formability and process technology [J].

Doege, E ;

Dröder, K .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 115 (01) :14-19

[5] Improvement of formability from room temperature to warm temperature in AZ-31 magnesium alloy [J].

Iwanaga, K ;

Tashiro, H ;

Okamoto, H ;

Shimizu, K .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 155 :1313-1316

[6] Anisotropic properties of magnesium sheet AZ31 [J].

Kaiser, F ;

Letzig, D ;

Bohlen, J ;

Styczynski, A ;

Hartig, C ;

Kainer, KU .

MAGNESIUM ALLOYS 2003, PTS 1 AND 2, 2003, 419-4 :315-320

[7] Texture development and its effect on mechanical properties of an AZ61 Mg alloy fabricated by equal channel angular pressing [J].

Kim, WJ ;

Hong, SI ;

Kim, YS ;

Min, SH ;

Jeong, HT ;

Lee, JD .

ACTA MATERIALIA, 2003, 51 (11) :3293-3307

[8] Microstructural evolutions of the Al strip prepared by cold rolling and continuous equal channel angular pressing [J].

Lee, JC ;

Seok, HK ;

Suh, JY .

ACTA MATERIALIA, 2002, 50 (16) :4005-4019

[9] Controlling the textures of the metal strips via the continuous confined strip shearing (C2S2) process [J].

Lee, JC ;

Seok, HK ;

Han, JH ;

Chung, YH .

MATERIALS RESEARCH BULLETIN, 2001, 36 (5-6) :997-1004

[10] Ductility enhancement in AZ31 magnesium alloy by controlling its grain structure [J].

Mukai, T ;

Yamanoi, M ;

Watanabe, H ;

Higashi, K .

SCRIPTA MATERIALIA, 2001, 45 (01) :89-94

← 1 2 →