Effect of Rare Earth Elements on Machining Characteristics of Austenitic Stainless Steels without Lead Addition

被引：0
|
作者：
Li Zhuang [1 ]
Wu Di [2 ]
Lv Wei [3 ]
Kang Shaopu [1 ]
Zheng Zhen [1 ]
机构：
[1] Shenyang Aerosp Univ, Sch Mat Sci & Engn, Shenyang 110136, Peoples R China
[2] Northeastern Univ, State Key Lab Rolling Automat, Shenyang 110004, Peoples R China
[3] Shenyang Aerospace Univ, Grad Sch, Shenyang 110136, Peoples R China
来源：
ADVANCES ON MATERIALS ENGINEERING | 2013年 / 377卷
基金：
中国国家自然科学基金;
关键词：
rare earth elements (ree); machining characteristics; austenitic stainless steels; without lead addition; MACHINABILITY;
D O I：
10.4028/www.scientific.net/AMM.377.128
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Rare earth elements (REE) are harmless for human health. REE addition contributes to the improvement of the machinability of the steels. In the present paper, machining characteristics of austenitic stainless steels without lead addition were investigated by adding free-machining elements, such as sulfur, REE and bismuth. The results have shown that large numbers of rounded, globular shaped inclusions were obtained for both steels. The machinability of steel B is better than that of steel A, and the cutting forces of steel B are lower than those of steel A at various cutting speeds. Lead can be substituted by REE and bismuth in free machinable austenitic stainless steels. REE significantly affects machining characteristics of austenitic stainless steels without lead addition. The mechanical properties of both steels were similar, and their fracture exhibited ductile characteristics. Satisfactory machinability and mechanical properties can be obtained for both steels.
引用
收藏
页码：128 / +
页数：2
相关论文
共 46 条
  • [31] Stress-induced martensitic transformation in metastable austenitic stainless steels: Effect on fatigue crack growth rate
    Khan, Z
    Ahmed, M
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 1996, 5 (02) : 201 - 208
  • [32] Effect of S addition on mechanical and machinability properties in austenitic Fe-Mn-Al-C lightweight steels
    Park, Hyungkwon
    Lee, Changuk
    Kim, Kyeong-Won
    Kim, Sung-Dae
    Jang, Jae Hoon
    Ha, Heon-Young
    Moon, Joonoh
    Lee, Chang-Hoon
    Park, Seong-Jun
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 856
  • [33] Early stages of dissolution corrosion in 316L and DIN 1.4970 austenitic stainless steels with and without anticorrosion coatings in static liquid lead-bismuth eutectic (LBE) at 500 °C
    Charalampopoulou, Evangelia
    Lambrinou, Konstantina
    Van der Donck, Tom
    Paladino, Boris
    Di Fonzo, Fabio
    Azina, Clio
    Eklund, Per
    Mraz, Stanislav
    Schneider, Jochen M.
    Schryvers, Dominique
    Delville, Remi
    MATERIALS CHARACTERIZATION, 2021, 178
  • [34] Effect of Nb/Ti/Zr/W on precipitation behavior and mechanical property of 310S austenitic stainless steels
    Wen Dong-hui
    Lyu Yang
    Li Zhen
    Wang Qing
    Tang Rui
    Dong Chuang
    CAILIAO GONGCHENG-JOURNAL OF MATERIALS ENGINEERING, 2019, 47 (09): : 61 - 71
  • [35] INVESTIGATING THE EFFECTS OF CUTTING PARAMETERS ON THE BUILT-UP-LAYER AND BUILT-UP-EDGE FORMATION DURING THE MACHINING OF AISI 310 AUSTENITIC STAINLESS STEELS
    Bilgin, Mehmet Burak
    MATERIALI IN TEHNOLOGIJE, 2015, 49 (05): : 779 - 784
  • [36] Effect of residual chemical elements (Cr, Ni and Cu) on machinability of leaded low carbon free machining steels
    Sousa, M. N.
    Evangelista Luiz, N.
    de Oliveira, D. C.
    de Souza Barrozo, M. A.
    Machado, A. R.
    MATERIALS SCIENCE AND TECHNOLOGY, 2012, 28 (02) : 220 - 226
  • [37] On the stress corrosion cracking and hydrogen embrittlement of sensitized austenitic stainless steels in boiling saturated magnesium chloride solutions: Effect of applied stress
    Alyousif, Osama M.
    Nishimura, Rokuro
    CORROSION SCIENCE, 2008, 50 (10) : 2919 - 2926
  • [38] Alloying the near surface layer of stainless steel with rare earth elements (REE) using high intensity pulsed plasma beams (HIPPB)
    Sartowska, Bozena
    Piekoszewski, Jerzy
    Walis, Lech
    Barlak, Marek
    Calliari, Irene
    Brunelli, Katya
    Senatorski, Jan
    Starosta, Wojciech
    ELECTRON MICROSCOPY XIV, 2012, 186 : 292 - +
  • [39] Effect of Temperature on Internal Reversible Hydrogen Embrittlement of SUH660 Iron-Based Superalloy and Austenitic Stainless Steels at Low Temperature
    Imade, Masaaki
    Zhang, Lin
    Iijima, Tadashi
    Fukuyama, Seiji
    Yokogawa, Kiyoshi
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2009, 73 (04) : 245 - 250
  • [40] Determination of rare earth elements and other trace elements (Y, Mn, Co, Cr) in seawater using Tm addition and Mg(OH)2 co-precipitation
    Freslon, Nicolas
    Bayon, Germain
    Birot, Dominique
    Bollinger, Claire
    Barrat, Jean Alix
    TALANTA, 2011, 85 (01) : 582 - 587
12345