The usability of GNSS mass-market receivers for cadastral surveys considering RTK and NRTK techniques

Nowadays many positioning techniques and methods are applied to the cadastral surveys. Starting from last decade, GPS/GNSS positioning had become one of the most used methodology thanks to the rapid development of satellite-based positioning and to the appearance of GNSS mass-market receivers and antennas. Methods based on these instruments are more affordable than the conventional ones even if their use for precise positioning is not so intuitive. This study is aimed to evaluate the use of single-frequency GPS/GNSS mass-market receivers for cadastral surveys, considering both single-base Real-Time Kinematic (RTK) and Network Real-Time Kinematic (NRTK) methodologies. Furthermore, a particular tool for predicting and estimating the occurrence of false fix of the phase ambiguities has been considered, in order to improve the accuracy and precision of the solutions. Considering the single-base positioning, the research results showed the difference of a few centimetres between the reference coordinates and the estimated ones if the distance between master and rover is less than 3 km, while considering the network positioning and the Virtual Reference Station correction, the difference are about a couple of centimetres for East and North component, and about 5 cm for the Up. (c) 2019 Institute of Seismology, China Earthquake Administration, etc. Production and hosting by Elsevier B.V. on behalf of KeAi Communications Co., Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).