Design of high-Q cavities in 2D photonic crystals air holes filled with polymer

We design novel photonic crystal heterostructure, substituting the air in the holes with materials of refractive index higher than n=1. This can be achieved by infiltrating the photonic crystal (PC) with polymer. We theoretically investigate the 1,2 cavity with two missing holes in the center, where the six holes surrounding the cavity are locally filled with polymer. We show that cavity modes can be differently tuned depending on the size and the position of the first hole adjacent to the cavity. A photonic microcavity with a high Q factor of 5.5 x 10(6) and a modal volume V of 0.1919 is demonstrated. We demonstrate that the calculated Q factor for the designed cavity increases by a factor of 22 relative to that for a cavity without displaced and reduced air holes, while the modal volume remains almost constant. (C) 2014 Elsevier GmbH. All rights reserved.