Assembling surface mounted components on ink-jet printed double sided paper circuit board

被引:29
作者
Andersson, Henrik A. [1 ]
Manuilskiy, Anatoliy [1 ]
Haller, Stefan [1 ]
Hummelgard, Magnus [2 ]
Siden, Johan [1 ]
Hummelgard, Christine [3 ]
Olin, Hakan [2 ]
Nilsson, Hans-Erik [1 ]
机构
[1] Mid Sweden Univ, Dept Elect Design, SE-85170 Sundsvall, Sweden
[2] Mid Sweden Univ, Dept Nat Sci, SE-85170 Sundsvall, Sweden
[3] Acreo Swedish ICT AB, SE-82442 Hudiksvall, Sweden
关键词
printed electronics; component mounting; conductive adhesives; ink jet; printed circuit board; silver nano particle ink; SMART PACKAGING APPLICATIONS; SILVER NANOPARTICLES; ORGANIC TRANSISTORS; ELECTRONICS; FABRICATION; BEHAVIOR; DEVICES; LIGHT;
D O I
10.1088/0957-4484/25/9/094002
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Printed electronics is a rapidly developing field where many components can already be manufactured on flexible substrates by printing or by other high speed manufacturing methods. However, the functionality of even the most inexpensive microcontroller or other integrated circuit is, at the present time and for the foreseeable future, out of reach by means of fully printed components. Therefore, it is of interest to investigate hybrid printed electronics, where regular electrical components are mounted on flexible substrates to achieve high functionality at a low cost. Moreover, the use of paper as a substrate for printed electronics is of growing interest because it is an environmentally friendly and renewable material and is, additionally, the main material used for many packages in which electronics functionalities could be integrated. One of the challenges for such hybrid printed electronics is the mounting of the components and the interconnection between layers on flexible substrates with printed conductive tracks that should provide as low a resistance as possible while still being able to be used in a high speed manufacturing process. In this article, several conductive adhesives are evaluated as well as soldering for mounting surface mounted components on a paper circuit board with ink-jet printed tracks and, in addition, a double sided Arduino compatible circuit board is manufactured and programmed.
引用
收藏
页数:9
相关论文
共 32 条
[1]  
ALASTALO A, 2010, P LOPE C, P8
[2]   Electrical sintering of nanoparticle structures [J].
Allen, Mark L. ;
Aronniemi, Mikko ;
Mattila, Tomi ;
Alastalo, Ari ;
Ojanpera, Kimmo ;
Suhonen, Mika ;
Seppa, Heikki .
NANOTECHNOLOGY, 2008, 19 (17)
[3]   Contacting paper-based supercapacitors to printed electronics on paper substrates [J].
Andersson, Henrik ;
Andres, Britta ;
Manuilskiy, Anatoliy ;
Forsberg, Sven ;
Hummelgard, Magnus ;
Backstrom, Joakim ;
Zhang, Renyun ;
Olin, Hakan .
NORDIC PULP & PAPER RESEARCH JOURNAL, 2012, 27 (02) :476-480
[4]   Inkjet Printed Silver Nanoparticle Humidity Sensor With Memory Effect on Paper [J].
Andersson, Henrik ;
Manuilskiy, Anatoliy ;
Unander, Tomas ;
Lidenmark, Cecilia ;
Forsberg, Sven ;
Nilsson, Hans-Erik .
IEEE SENSORS JOURNAL, 2012, 12 (06) :1901-1905
[5]   Organic materials for printed electronics [J].
Berggren, M. ;
Nilsson, D. ;
Robinson, N. D. .
NATURE MATERIALS, 2007, 6 (01) :3-5
[6]   Ink-jet fabrication of electronic components [J].
Bidoki, S. M. ;
Lewis, D. M. ;
Clark, M. ;
Vakorov, A. ;
Millner, P. A. ;
McGorman, D. .
JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2007, 17 (05) :967-974
[7]   Inkjet-printed silver nanoparticles on nano-engineered cellulose films for electrically conducting structures and organic transistors: concept and challenges [J].
Chinga-Carrasco, Gary ;
Tobjork, Daniel ;
Osterbacka, Ronald .
JOURNAL OF NANOPARTICLE RESEARCH, 2012, 14 (11)
[8]   Influence of Surface Properties of Coated Papers on Printed Electronics [J].
Ihalainen, Petri ;
Maattanen, Anni ;
Jarnstrom, Joakim ;
Tobjork, Daniel ;
Osterbacka, Ronald ;
Peltonen, Jouko .
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2012, 51 (17) :6025-6036
[9]   Fast-Switching Printed Organic Electrochemical Transistors Including Electronic Vias Through Plastic and Paper Substrates [J].
Kawahara, Jun ;
Ersman, Peter Andersson ;
Katoh, Kazuya ;
Berggren, Magnus .
IEEE TRANSACTIONS ON ELECTRON DEVICES, 2013, 60 (06) :2052-2056
[10]   Flexible active matrix addressed displays manufactured by printing and coating techniques [J].
Kawahara, Jun ;
Ersman, Peter Andersson ;
Nilsson, David ;
Katoh, Kazuya ;
Nakata, Yasukazu ;
Sandberg, Mats ;
Nilsson, Marie ;
Gustafsson, Goran ;
Berggren, Magnus .
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 2013, 51 (04) :265-271