Thermal cycling behavior of alumina-graphite brazed joints in electron tube applications

被引：11

作者：

Dandapat, Nandadulal ^{[1
,2
]}

Ghosh, Sumana ^{[1
]}

Pal, Kalyan Sundar ^{[3
]}

Datta, Someswar ^{[1
]}

Guha, Bichitra Kumar ^{[2
]}

机构：

[1] CSIR, Cent Glass & Ceram Res Inst, Kolkata 700032, India

[2] Bengal Engn & Sci Univ, Dept Phys, Howrah 711103, India

[3] Inst Plasma Res, Gandhinagar 302428, India

来源：

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2014年 / 24卷 / 06期

关键词：

brazed joints; thermal cycling; brazing strength; hermeticity; FILLER METAL; CU; ALLOYS; CARBON; TI;

D O I：

10.1016/S1003-6326(14)63239-8

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Alumina was joined with graphite by active metal brazing technique at 895, 900, 905, and 910 degrees C for 10 min in vacuum of 0.67 mPa using Ti-Cu-Ag (68.8Ag-26.7Cu-4.5Ti; mass fraction, %) as filler material. The brazed samples were thermal cycled between 30 and 600 degrees C and characterized. X-ray diffraction results show strong reaction between titanium and carbon as well as titanium and alumina. Scanning electron microscopy and helium leak tests show that the initial and thermal cycled brazed samples are devoid of cracks or any other defects and hermeticity in nature. Brazing strength of the joints is found to be satisfactory.

引用

页码：1666 / 1673

页数：8

共 47 条

[41] Enhanced mechanical properties and thermal cycling stability of Al2O3-4J42 joints brazed using Ag-Cu-Ti/Cu/Ag-Cu composite filler
Zhu, Qianying
Li, Shenhou
Hu, Kangjia
Liang, Xuewei
Cai, Yangyang
Liu, Zheng
Zhang, Yong
CERAMICS INTERNATIONAL, 2021, 47 (21) : 30247 - 30255
[42] Assessing the fracture and dynamic mechanical performance of CF/PEKK joints bonded with epoxy-based adhesive film for aerospace applications: Impact of thermal and cycling hygrothermal conditions
Yildirim, Ceren
Ulus, Hasan
Sas, Hatice S.
Topal, Serra
Yildiz, Mehmet
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2025, 190
[43] THERMAL-BEHAVIOR OF STAGE-2 FECL3 GRAPHITE-INTERCALATION COMPOUND STUDIED BY ANALYTICAL ELECTRON-MICROSCOPY
NAGAI, K
KURATA, H
ISODA, S
KOBAYASHI, T
JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, 1992, 53 (07) : 883 - 888
[44] Manufacturing and evaluation of thermal expansion behavior of discontinuous pitch graphite fiber reinforced copper alloys for CTE matching heat sink applications.
Cornie, JA
Zhang, SY
2003 INTERNATIONAL SYMPOSIUM ON MICROELECTRONICS, 2003, 5288 : 310 - 315
[45] Thermal cycling behavior and stress distribution in TGO layer of MCrAlYX-type coatings via high-current pulsed electron beam modification
Yao, Y. M.
Cai, J.
Gao, J.
Guan, Q. F.
Lyu, P.
Hua, Y. Q.
Ye, Y. . X.
Xue, W.
APPLIED SURFACE SCIENCE, 2022, 605
[46] Study of deuterium permeation, retention, and desorption in SiC coatings submitted to relevant conditions for breeder blanket applications: thermal cycling effect under electron irradiation and oxygen exposure
Hernandez, T.
Morono, A.
Sanchez, F. J.
Maffiotte, C.
Monclus, M. A.
Gonzalez-Arrabal, R.
JOURNAL OF NUCLEAR MATERIALS, 2021, 557
[47] Comparison of calcium-magnesium-alumina-silicate (CMAS) resistance behavior of produced with electron beam physical vapor deposition (EB-PVD) method YSZ and Gd2Zr2O7/YSZ thermal barrier coatings systems
Ozgurluk, Yasin
Karaoglanli, Abdullah Cahit
Ahlatci, Hayrettin
VACUUM, 2021, 194

← 1 2 3 4 5 →