Thermal cycling behavior of alumina-graphite brazed joints in electron tube applications

被引：11

作者：

Dandapat, Nandadulal ^{[1
,2
]}

Ghosh, Sumana ^{[1
]}

Pal, Kalyan Sundar ^{[3
]}

Datta, Someswar ^{[1
]}

Guha, Bichitra Kumar ^{[2
]}

机构：

[1] CSIR, Cent Glass & Ceram Res Inst, Kolkata 700032, India

[2] Bengal Engn & Sci Univ, Dept Phys, Howrah 711103, India

[3] Inst Plasma Res, Gandhinagar 302428, India

来源：

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2014年 / 24卷 / 06期

关键词：

brazed joints; thermal cycling; brazing strength; hermeticity; FILLER METAL; CU; ALLOYS; CARBON; TI;

D O I：

10.1016/S1003-6326(14)63239-8

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Alumina was joined with graphite by active metal brazing technique at 895, 900, 905, and 910 degrees C for 10 min in vacuum of 0.67 mPa using Ti-Cu-Ag (68.8Ag-26.7Cu-4.5Ti; mass fraction, %) as filler material. The brazed samples were thermal cycled between 30 and 600 degrees C and characterized. X-ray diffraction results show strong reaction between titanium and carbon as well as titanium and alumina. Scanning electron microscopy and helium leak tests show that the initial and thermal cycled brazed samples are devoid of cracks or any other defects and hermeticity in nature. Brazing strength of the joints is found to be satisfactory.

引用

页码：1666 / 1673

页数：8

共 47 条

[31] Thermal Cycling Behavior of Thermal Barrier Coatings with MCrAIY Bond Coat Irradiated by High-Current Pulsed Electron Beam
Cai, Jie
Lv, Peng
Guan, Qingfeng
Xu, Xiaojing
Lu, Jinzhong
Wang, Zhiping
Han, Zhiyong
ACS APPLIED MATERIALS & INTERFACES, 2016, 8 (47) : 32541 - 32556
[32] Thermal Cycling Behavior of Zinc Antimonide Thin Films for High Temperature Thermoelectric Power Generation Applications
Shim, Hyung Cheoul
Woo, Chang-Su
Han, Seungwoo
ACS APPLIED MATERIALS & INTERFACES, 2015, 7 (32) : 17866 - 17873
[33] The hot corrosion behavior in vanadate environment and thermal cycling behaviors of YTZ and 2GYTZ for thermal barrier coating applications
Wang, Jinshuang
Chen, Luyao
Niu, Linfeng
Yang, Jiaojiao
Wang, Mengfan
Sun, Junbin
Yu, Yongsheng
Wang, Yinghui
Liu, Bing
Jing, Qiangshan
SURFACE & COATINGS TECHNOLOGY, 2020, 404
[34] Conceptual design and manufacture of spirally wound alumina tubes with improved thermal shock behavior for refractory applications
Jakobsen, Daniel
Rauch, Hunter
Dudczig, Steffen
Schumacher, Daniel
Roosen, Andreas
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2016, 229 : 623 - 632
[35] Thermal-Cycling Behavior of Plasma-Sprayed Partially Stabilized Zirconia Coatings on High-Density Graphite Substrate
Sure, Jagadeesh
Thyagarajan, K.
Mallika, C.
Mudali, U. Kamachi
JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2015, 24 (06) : 925 - 937
[36] Thermal-Cycling Behavior of Plasma-Sprayed Partially Stabilized Zirconia Coatings on High-Density Graphite Substrate
Jagadeesh Sure
K. Thyagarajan
C. Mallika
U. Kamachi Mudali
Journal of Thermal Spray Technology, 2015, 24 : 925 - 937
[37] Microstructure and thermal cycling behavior of CeO2 coatings deposited by the electron beam physical vapor technique
Huang, Jianping
Song, Guangping
Lv, Hongzhen
Li, Yuxin
Sun, Yue
He, Xiaodong
Zhang, Sam
Fu, Yongqing
Du, Shanyi
Li, Yibin
THIN SOLID FILMS, 2013, 544 : 270 - 275
[38] Effect of Addition of Small Amount of Zinc on Microstructural Evolution and Thermal Shock Behavior in Low-Ag Sn-Ag-Cu Solder Joints during Thermal Cycling
Hamada, Naoyuki
Uesugi, Tokuteru
Takigawa, Yorinobu
Higashi, Kenji
MATERIALS TRANSACTIONS, 2013, 54 (05) : 796 - 805
[39] Effect of thermal cycling on the damping behavior in alumina borate whisker with and without Bi2O3 coating reinforced pure aluminum composites
Liu, Gang
Tang, Shawei
Ren, Wenchao
Hu, Jin
MATERIALS & DESIGN, 2014, 60 : 244 - 249
[40] Microstructure evolution，thermal cycling lifetime， and failure behavior analysis of YSZ thermal barrier coatings prepared by EB-PVD with different electron beam currents
Mu, Rende
Ding, Ning
Liu, Guanxi
Luo, Yuqing
Dai, Jianwei
Journal of Materials Engineering, 2024, 52 (12) : 44 - 52

← 1 2 3 4 5 →