Effect of Kaolin on sintering and machinability of fluor-phlogopite glass ceramic

被引：0
|
作者：
Khatibi, E. [1 ]
Akhlagh, P. Khosh [1 ]
Shahi, P. Akbar [1 ]
Yekta, B. Eftekhari [1 ]
Marghussian, V. K. [1 ]
机构：
[1] Iran Univ Sci & Technol, Div Ceram, Dept Mat, Tehran, Iran
来源：
ADVANCES IN APPLIED CERAMICS | 2009年 / 108卷 / 04期
关键词：
Fluor-phlogopite; Kaolin; Machinability;
D O I：
10.1179/174367609X368794
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The effect of kaolin on pressability, sintering, mechanical properties, and machinability of a fluor phlogopite glass ceramic was investigated. Crystallinity and microstructure of specimens were determined by X-ray diffraction and scanning electron microscopy methods. Machinability of sintered specimen was investigated by visual assessment of chipping of the drilled specimen rims and measurement of the particle size distribution of chips obtained during drilling. The results indicated that while adding of kaolin improves pressability and hardness of samples, reduces their machinability and bending strength. Furthermore, in the high bearing kaolin specimens, beside fluor-phlogopite, sapphirin and spinel, mullite was also precipitated.
引用
收藏
页码：249 / 252
页数：4
相关论文
共 50 条
  • [31] Pressureless Sintering of Apatite/Wollastonite-Phlogopite Glass-Ceramics
    Faeghi-Nia, Aida
    Marghussian, Vahak K.
    Taheri-Nassaj, Ehsan
    Pascual, Maria J.
    Duran, Alicia
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2009, 92 (07) : 1514 - 1518
  • [32] Cordierite Ceramic Through Glass and Ceramic Routes From Kaolin And Talc
    Yahya, Ahmed M.
    El-Kalioby, Baher A.
    Soltan, Abdel Monem M.
    Kenawy, Sayed H.
    Hamzawy, Esmat M. A.
    EGYPTIAN JOURNAL OF CHEMISTRY, 2021, 64 (04): : 1751 - 1758
  • [33] The effect of wollastonite on sintering of anorthite ceramic body based on illite-smectite clay and kaolin
    Sokolar, Radomir
    Nguyen, Martin
    Vsiansky, Dalibor
    Pavelka, Oldrich
    Trnik, Anton
    APPLIED CLAY SCIENCE, 2025, 270
  • [34] Effect of phlogopite mica on the sintering point and colour of a claybody
    Univ of Art and Design, Helsinki, Finland
    Key Engineering Materials, 1997, 132-136 (Pt 3): : 2156 - 2159
  • [35] Machinability: Zirconia-reinforced lithium silicate glass ceramic versus lithium disilicate glass ceramic
    Chen, Xing-Peng
    Xiang, Zhong-Xia
    Song, Xiao-Fei
    Yin, Ling
    JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2020, 101
  • [36] Effect of a LZSA glass-ceramic addition on the sintering behavior of alumina
    O. R. K. Montedo
    P. C. Milak
    F. D. Minatto
    R. B. Nuernberg
    C. A. Faller
    A. P. N. Oliveira
    A. De Noni
    Journal of Thermal Analysis and Calorimetry, 2016, 124 : 241 - 249
  • [37] Effect of a LZSA glass-ceramic addition on the sintering behavior of alumina
    Montedo, O. R. K.
    Milak, P. C.
    Minatto, F. D.
    Nuernberg, R. B.
    Faller, C. A.
    Oliveira, A. P. N.
    De Noni, A., Jr.
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2016, 124 (01) : 241 - 249
  • [38] Constrained sintering of glass, glass-ceramic and ceramic coatings on metal substrates
    Calata, JN
    Lu, GQ
    Chuang, TJ
    SURFACE AND INTERFACE ANALYSIS, 2001, 31 (07) : 673 - 681
  • [39] EFFECT OF TIO2 ADDITION ON CRYSTALLIZATION OF PHLOGOPITE AND APATITE-CONTAINING GLASS-CERAMIC
    CHEN, XF
    ZHANG, XK
    TENG, LD
    ZHANG, MM
    INSTITUTE OF PHYSICS CONFERENCE SERIES, 1993, (130): : 209 - 212
  • [40] Low melting temperature glass-ceramic with good machinability
    Xi'an Jiaotong Univ, Xi'an, China
    Hsi An Chiao Tung Ta Hsueh, 6 (50-54):
12345