High-power lithium polysulfide-carbon battery

被引：23
|
作者：
Shin, Hwang-dong [1 ]
Agostini, Marco [2 ]
Belharouak, Ilias [3 ,4 ]
Hassoun, Jusef [2 ,5 ]
Sun, Yang-Kook [1 ]
机构：
[1] Hanyang Univ, Dept Energy Engn, Seoul 133791, South Korea
[2] Univ Roma La Sapienza, Dept Chem, I-00185 Rome, Italy
[3] Qatar Fdn, HBKU, QEERI, Doha, Qatar
[4] HBKU, Coll Sci & Engn, Doha, Qatar
[5] Univ Ferrara, Dept Chem & Pharmaceut Sci, I-44121 Ferrara, Italy
来源：
CARBON | 2016年 / 96卷
关键词：
SULFUR BATTERIES; CATHODE; COMPOSITES; CHALLENGES; DISCHARGE; PORES;
D O I：
10.1016/j.carbon.2015.09.034
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
We report a lithium battery using activated carbon on gas diffusion layer (GDL) electrode as host for lithium polysulfide conversion reaction. The cell operates within 2.8 and 2.1 V and delivers a capacity ranging from 400 mAh g(-1) at 1C to 150 mAh g(-1) at 40C over 100 cycles. These characteristics allow the achievement of high energy and power density, i.e. practically estimated to reach the maximum values of the order of 300 Wh kg(-1) and 12 kW kg(-1), respectively. These values, exceeding those delivered by the conventional lithium ion batteries, make our battery of sure interest for practical applications. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码：125 / 130
页数：6
相关论文
共 50 条
  • [31] Damage in Lithium Niobate Induced by a High-Power Proton-Carbon Beam
    Kovivchak, V. S.
    Panova, T. V.
    Burlakov, R. B.
    JOURNAL OF SURFACE INVESTIGATION-X-RAY SYNCHROTRON AND NEUTRON TECHNIQUES, 2008, 2 (02) : 200 - 202
  • [32] Carbon nanotubes/amorphous carbon composites as high-power negative electrodes in lithium ion capacitors
    S. R. Sivakkumar
    A. G. Pandolfo
    Journal of Applied Electrochemistry, 2014, 44 : 105 - 113
  • [33] Carbon nanotubes/amorphous carbon composites as high-power negative electrodes in lithium ion capacitors
    Sivakkumar, S. R.
    Pandolfo, A. G.
    JOURNAL OF APPLIED ELECTROCHEMISTRY, 2014, 44 (01) : 105 - 113
  • [34] A lemon cell battery for high-power applications
    Muske, Kenneth R.
    Nigh, Christopher W.
    Weinstein, Randy D.
    JOURNAL OF CHEMICAL EDUCATION, 2007, 84 (04) : 635 - 638
  • [35] Study on temperature uniformity and rising rate of high-power lithium-ion battery pack
    Wang, Bo
    Nie, Yu-ming
    Yin, Zhan-ji
    He, Zhi-tong
    MECHATRONICS ENGINEERING, COMPUTING AND INFORMATION TECHNOLOGY, 2014, 556-562 : 265 - 269
  • [36] Fabricaion of nanoporous carbon as an anode for high power lithium-ion battery
    Sriboonpeng, Pongsatorn
    Wongkasemjit, Sujitra
    Chaisuwan, Thanyalak
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2018, 255
  • [37] Research on the Performance Improvement Method for Lithium-Ion Battery in High-Power Application Scenarios
    Zhou, Pengfei
    Zhu, Liying
    Fu, Dawei
    Du, Jianguo
    Zhao, Xinze
    Sun, Bingxiang
    ENERGIES, 2024, 17 (07)
  • [38] Thermal Analysis of a High-Power Lithium-Ion Battery System with Indirect Air Cooling
    Teng, Ho
    SAE INTERNATIONAL JOURNAL OF ALTERNATIVE POWERTRAINS, 2012, 1 (01) : 79 - 88
  • [39] Carboxylated polyimide separator with excellent lithium ion transport properties for a high-power density lithium-ion battery
    Lin, Chun-Er
    Zhang, Hong
    Song, You-Zhi
    Zhang, Yin
    Yuan, Jia-Jia
    Zhu, Bao-Ku
    JOURNAL OF MATERIALS CHEMISTRY A, 2018, 6 (03) : 991 - 998
  • [40] Investigation into the role of silica in lithium polysulfide adsorption for lithium sulfur battery
    Kim, Miso
    Kang, Sung-Hwan
    ManueL, James
    Zhao, Xiaohui
    Cho, Kwon Koo
    Ahn, Jou Hyeon
    MATERIALS RESEARCH BULLETIN, 2015, 69 : 29 - 35
12345