Laser Surface Cladding of Ti-6Al-4V on AISI 316L Stainless Steel for Bio-implant Application

被引：0
作者：
Kumar, A. [1 ]
Roy, S. Kumar [1 ]
Berger, H. [2 ]
Majumdar, J. Dutta [1 ]
机构：
[1] Indian Inst Technol, Dept Met & Mat Engn, Kharagpur 721302, W Bengal, India
[2] CSIR, Natl Laser Ctr, ZA-0001 Pretoria, South Africa
来源：
LASERS IN ENGINEERING | 2014年 / 28卷 / 1-2期
关键词：
Nd:YAG laser; laser surface cladding; Ti-6Al-4V; AISI 316L stainless steel; microstructure; hardness; wear; WEAR-RESISTANCE; CORROSION; MICROSTRUCTURE; TITANIUM; ALLOY;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The present study concerns an in-depth investigation of the influence of laser surface cladding of Ti-6Al-4V on the microstructure (both the top surface, cross-section and interface), wear resistance, corrosion resistance and bio-activity of AISI 316L stainless steel. Laser surface cladding has been carried out using a 5 kW continuous wave (CW) fibber optics delivery Nd:YAG laser with a beam diameter of 4 mm. Microstructure of the surface clad layer consists of acicular alpha' -phase and the microstructure of the interface consists of equiaxed grains of alpha-phase and white precipitates of FeTi intermetallic phase at the grain boundaries. The average microhardness of the clad zone and the interface increases to 240 and 531 VHN, respectively as compared to 220 VHN for as-received AISI 316L stainless steel. Fretting wear behaviour against hardened steel ball showed a marginal improvement in fretting wear resistance due to laser surface cladding. On the other hand, the wear resistance of the interface increases significantly. An improvement in corrosion resistance with improved bio-activity is also noticed due to laser surface cladding.
引用
收藏
页码：11 / 33
页数：23
相关论文
共 50 条
[41]   A review of the corrosion of laser nitrided Ti-6Al-4V [J].
Razavi, Reza Shoja ;
Gordani, Gholam Reza ;
Man, H. C. .
ANTI-CORROSION METHODS AND MATERIALS, 2011, 58 (03) :140-154
[42]   Benefits of interfacial regulation with interlayers in laser welding Ti6Al4V/316L steel [J].
Li, Junzhao ;
Liu, Yibo ;
Gao, Yifan ;
Jin, Peng ;
Sun, Qingjie ;
Feng, Jicai .
OPTICS AND LASER TECHNOLOGY, 2020, 125
[43]   Surface Modification of Ti4Al6V Alloy by Laser Cladding with 17-4PH Stainless Steel Powder [J].
Akinlabi, Esther T. ;
Bayode, Abiodun .
ADVANCES IN MATERIAL SCIENCES AND ENGINEERING, 2020, :465-471
[44]   In Vitro Corrosion Behaviour of Ti–6Al–4V and 316L Stainless Steel Alloys for Biomedical Implant Applications [J].
Gnanavel S. ;
Ponnusamy S. ;
Mohan L. ;
Muthamizhchelvan C. .
Journal of Bio- and Tribo-Corrosion, 2018, 4 (01)
[45]   Design, development and tribological characterization of Ti-6Al-4V/hydroxyapatite composite for bio-implant applications [J].
Singh, Gurpreet ;
Sharma, Neeraj ;
Kumar, Deepak ;
Hegab, Hussien .
MATERIALS CHEMISTRY AND PHYSICS, 2020, 243
[46]   Optimization and wear behaviors of 316L stainless steel laser cladding on rail material [J].
Ding, Haohao ;
Yang, Tao ;
Wang, Wenjian ;
Zhu, Yi ;
Lin, Qiang ;
Guo, Jun ;
Xiao, Qian ;
Gan, Lu ;
Liu, Qiyue .
WEAR, 2023, 523
[47]   Laser cladding of Ti-6Al-4V alloy with vanadium carbide particles [J].
El-Labban, H. F. ;
Mahmoud, E. R., I ;
Al-Wadai, H. .
ADVANCES IN PRODUCTION ENGINEERING & MANAGEMENT, 2014, 9 (04) :159-167
[48]   Study of boriding surface treatment in the tribological behavior of an AISI 316L stainless steel [J].
Arteaga-Hernandez, L. A. ;
Cuao-Moreu, C. A. ;
Gonzalez-Rivera, C. E. ;
Alvarez-Vera, M. ;
Ortega-Saenz, J. A. ;
Hernandez-Rodriguez, M. A. L. .
WEAR, 2021, 477
[49]   Lightweight refractory high entropy alloy coating by laser cladding on Ti-6Al-4V surface [J].
Chen, Lin ;
Wang, Yueyi ;
Hao, Xuanhong ;
Zhang, Xiaowei ;
Liu, Hongxi .
VACUUM, 2021, 183
[50]   Response of boride coating on the Ti-6Al-4V alloy to corrosion and fretting corrosion behavior in Ringer's solution for bio-implant application [J].
Bose, Sivakumar ;
Pathak, Lokesh Chandra ;
Singh, Raghuvir .
APPLIED SURFACE SCIENCE, 2018, 433 :1158-1174
12345