The optimum conditions for comminution of magnetic particles driven by a rotating magnetic field using the Taguchi method

被引：31

作者：

Chou, Chuen-Shii ^{[1
]}

Ho, Cheng-Yang ^{[1
]}

Huang, Che-I ^{[1
]}

机构：

[1] Natl Pingtung Univ Sci & Technol, Dept Mech Engn, Powder Technol R&D Lab, Pingtung 912, Taiwan

来源：

ADVANCED POWDER TECHNOLOGY | 2009年 / 20卷 / 01期

关键词：

Comminution; Attrition; Taguchi method; Moving pattern; Magnetic particle; Rotational magnetic field; GRAIN-SIZE REDUCTION; GRANULAR FLOWS; ATTRITION; OPTIMIZATION; SIMULATION; BEHAVIOR; POWDERS; DESIGN;

D O I：

10.1016/j.apt.2008.02.002

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

Using the Taguchi method, this study analyzed the optimum conditions for comminution of magnetic particles (such as Ni particles) in pure water contained in a. ask, which was located on top of an actuator that contained a rotating bar magnet. The controllable factors used in this study consisted of the following: (1) the container, (2) the mass ratio of water-to-Ni particles, (3) the rotation speed of the bar magnet and (4) the time of attrition. The percentage contribution of each controllable factor was also determined. A digital camera and a particle-size analyzer were used to record the flow patterns and particle-size distributions of Ni, respectively. The confirmation experiment was carried out according to the optimum conditions, so that the average percentage of the optimum particle size (6100 nm) and the smallest particle sizes could reach 80.59% and 22.5 nm, respectively. (c) 2008 Published by Elsevier B.V. on behalf of The Society of Powder Technology Japan.

引用

页码：55 / 61

页数：7

共 39 条

[1] Light attrition of uranium dioxide powder [J].

Balakrishna, P ;

Murty, BN ;

Ratnam, DV ;

Anuradha, M ;

Ganguly, C .

CERAMICS INTERNATIONAL, 2003, 29 (01) :99-105

[2] Comminution of ceramics in stirred media mills and wear of grinding beads [J].

Becker, M ;

Schwedes, J .

POWDER TECHNOLOGY, 1999, 105 (1-3) :374-381

[3] IMPROVING THE QUALITY OF AN OPTIMAL POWER-FLOW SOLUTION BY TAGUCHI METHOD [J].

BOUNOU, M ;

LEFEBVRE, S ;

DO, XD .

INTERNATIONAL JOURNAL OF ELECTRICAL POWER & ENERGY SYSTEMS, 1995, 17 (02) :113-118

[4] Particle attrition due to shearing - the effects of stress, strain and particle shape [J].

Bridgwater, J ;

Utsumi, R ;

Zhang, Z ;

Tuladhar, T .

CHEMICAL ENGINEERING SCIENCE, 2003, 58 (20) :4649-4665

[5]

BUNGE F, 1992, ADV POWDER TECHNOL, V3, P55

[6] Optimization of the design parameters of Parallel-Plain Fin heat sink module cooling phenomenon based on the Taguchi method [J].

Chiang, KT .

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2005, 32 (09) :1193-1201

[7] The steady inhomogeneous rapid granular shear flow of nearly elastic spheres [J].

Chou, CS .

PHYSICA A, 2000, 287 (1-2) :127-152

[8] Preparing magnetic powder using a simple attrition method containing a rotating magnetic field [J].

Chou, CS ;

Chu, MC .

ADVANCED POWDER TECHNOLOGY, 2005, 16 (05) :435-449

[9]

CHOU CS, ADV POWDER IN PRESS

[10] Minimization of warpage and sink index in injection-molded thermoplastic parts using Taguchi optimization method [J].

Erzurumlu, Tuncay ;

Ozcelik, Babur .

MATERIALS & DESIGN, 2006, 27 (10) :853-861

← 1 2 3 4 →