Study on wear debris generation in cold rolling of aluminum (Part 1) - The mechanism of wear debris generation

被引：0
|
作者：
Shibata, J
Seki, K
Ogura, S
Wakabayashi, T
机构：
[1] Nippon Mitsubishi Oil Corp, Lubricants Res Lab, Naka Ku, Yokohama, Kanagawa 2310815, Japan
[2] Kagawa Univ, Fac Engn, Dept Adv Mat Sci, Takamatsu, Kagawa 7610396, Japan
来源：
JOURNAL OF JAPANESE SOCIETY OF TRIBOLOGISTS | 2002年 / 47卷 / 04期
关键词：
rolling oil; cold rolling; aluminum; wear debris; sliding distance;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Amounts of wear debris generated in cold rolling of aluminum were experimentally measured and the following results were obtained by detailed investigation of those wear debris amounts: (1) The new equation was proposed to calculate the total slip distance between the work roll and the aluminum material, namely, "sliding friction distance". This equation was applicable to the case where the forward slip ratio was negative. (2) The amounts of wear debris generation were well related to the magnitude of sliding distance between the work roll and the aluminum material, but not by the degree of intimate metallic contact between them. This means that the mechanism of wear debris generation could be explained by the above proposed equation.
引用
收藏
页码：306 / 312
页数：7
相关论文
共 50 条
  • [1] Study on wear debris generation in cold rolling of aluminum (Part 1) - The mechanism of wear debris generation
    Shibata, Junichi
    Seki, Katsumi
    Ogura, Shigetoshi
    Wakabayashi, Toshiaki
    Toraibarojisuto/Journal of Japanese Society of Tribologists, 2002, 47 (04): : 306 - 312
  • [2] Study on wear debris generation in cold rolling of aluminum (Part 2) - The influence of oiliness agents on wear debris generation
    Shibata, J
    Seki, K
    Ogura, S
    Wakabayashi, T
    JOURNAL OF JAPANESE SOCIETY OF TRIBOLOGISTS, 2002, 47 (04) : 313 - 320
  • [3] Study on wear debris generation in cold rolling of aluminum (Part 2) - The influence of oiliness agents on wear debris generation
    Shibata, Junichi
    Seki, Katsumi
    Ogura, Shigetoshi
    Wakabayashi, Toshiaki
    Toraibarojisuto/Journal of Japanese Society of Tribologists, 2002, 47 (04): : 313 - 320
  • [4] Wear debris generation during cold rolling of stainless steels
    Labiapari, Wilian da S.
    de Alcantara, Claudio M.
    Costa, Henara Lillian
    De Mello, Jose Daniel B.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2015, 223 : 164 - 170
  • [5] Wear debris generation mechanism for polymers studied by nanoscratching
    Sani, RBM
    Sinha, SK
    Tan, JPY
    Zeng, KY
    PHILOSOPHICAL MAGAZINE, 2005, 85 (19) : 2101 - 2122
  • [6] Modeling UHMWPE wear debris generation
    Baudriller, H.
    Chabrand, P.
    Moukoko, D.
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 2007, 80B (02) : 479 - 485
  • [7] EFFECT OF WEAR DEBRIS ON WEAR IN ROLLING SLIDING MOTION
    SANTANAM, N
    WEAR, 1983, 90 (02) : 261 - 267
  • [8] MICROSCOPIC OBSERVATIONS OF WEAR DEBRIS A CONTRIBUTION TO STUDY OF WEAR MECHANISM
    ALESSAND.G
    PERUZZI, R
    PELOSINI, DL
    CONSERVA, M
    METALLURGIA ITALIANA, 1967, 59 (12): : 941 - &
  • [9] Mesoscale Numerical Modeling for Predicting Wear Debris Generation
    Li, Tongyang
    Shi, Jian
    Wang, Shaoping
    Zio, Enrico
    Ma, Zhonghai
    TRIBOLOGY LETTERS, 2019, 67 (02)
  • [10] ROLL BITE CONDITIONS CONTROLLING FORMATION OF WEAR DEBRIS DURING COLD-ROLLING OF ALUMINUM
    JANUSZKIEWICZ, KR
    STRATFORD, G
    WARD, T
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1994, 45 (1-4) : 117 - 124
12345