共 55 条
Investigation on UV Photoresponsivity of main electrical properties of Au/CuO-PVA/n-Si MPS type Schottky Barrier Diodes (SBDs)
被引:20
作者:
Demir, Gulcin Ersoz
[1
]
机构:
[1] Selcuk Univ, Beysehir AA Fac Business, Dept Management Informat Syst, TR-42700 Konya, Turkey
关键词:
CuO-PVA;
Schottky diodes;
MPS;
Photodiodes;
Photocurrent;
UV Light intensities;
COPPER-OXIDE NANOPARTICLES;
PHOTOCONDUCTIVITY PROPERTIES;
VOLTAGE CHARACTERISTICS;
DIELECTRIC-PROPERTIES;
AU/N-SI;
ILLUMINATION;
TEMPERATURE;
BEHAVIOR;
PURE;
PLOT;
D O I:
10.1016/j.physb.2020.412723
中图分类号:
O469 [凝聚态物理学];
学科分类号:
070205 ;
摘要:
In this study, (CuO doped PVA) composite material was deposited using spin coating technique on n-Si and the Au/CuO-PVA/n-Si Metal/Polymer/Semiconductor type Schottky Barrier Diodes (MPS type SBDs) were fabricated. The electrical measurements of Au/CuO-PVA/n-Si SBDs were realized in the dark and under various UV (365 nm) light intensities ranging from 50 to 250 mW/cm(2). The basic parameters of the MPS type SBDs such as leakage current (I-0), zero bias barrier height (Phi(B0)), barrier height (Phi(B)), ideality factor (n), series resistance (R-s), shunt resistance (R-sh), rectification rate (RR), photocurrent (I-pc) and surface states (N-ss) were obtained Current-Voltage (I-V) plot based on Thermionic Emission (TE) theory, and Norde function depending on the UV light intensity. As the light intensity increases, RR, R-sh, Phi(B0), and Phi(B) decreased but the n and I-0 increased. In addition, the increase of UV light intensity caused the increase of photocurrent in MPS type SBDs and thus MPS type SBDs exhibited more ohmic behavior.
引用
收藏
页数:7
相关论文