Hydrogen injection as additional fuel in gas turbine combustor. Evaluation of effects

被引：72

作者：

Juste, G. L. ^{[1
]}

机构：

[1] Univ Politecn Madrid, Lab Prop, Escuela Tecn Super Ingn Aeronaut, E-28040 Madrid, Spain

来源：

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY | 2006年 / 31卷 / 14期

关键词：

gas turbine; hydrogen combustion emissions;

D O I：

10.1016/j.ijhydene.2006.02.006

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

Industrial gas turbines fuelled by fossil fuels have been used widely in power generation and combined heat and power for many years. However they have to meet severe NOx CO and CO2 (greenhouse effect) emissions legislation in many countries. This paper reports a study on injection of small quantities of hydrogen in a hydrocarbon fuelled burner like additionally fuel to reduce the pollutants emissions. Hydrogen is injected in the primary zone, premixed with the air. Using this injection together lean primary zone, it is possible to reduce the NOx level while CO an HC levels remains approximately constant. The influence of hydrogen injection on CO, HC and CO2 emissions is mainly due to factors such as hydrocarbon fuel substitution and chemical kinetics. (c) 2006 International Association for Hydrogen Energy. Published by Elsevier Ltd. All rights reserved.

引用

页码：2112 / 2121

页数：10

共 29 条

[1]

ANDERSON DN, 1976, X3301 NASA TM

[2]

ANDREWS GE, 1993, CP536 AGARD

[3]

CHIGIER NA, 1981, MACGRAWHILL SERIES E, P317

[4] DEVELOPMENT OF A LIQUID-FUELED, LEAN-PREMIXED GAS-TURBINE COMBUSTOR [J].

COWELL, LH ;

SMITH, KO .

JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 1993, 115 (03) :554-562

[5]

EPA, 2003, FED REG

[6]

FOGLESONG RE, 1999, 35 AIAA ASME SAE ASE

[7]

*GLOB IND AN INC, 2004, TURB TURB GEN SETS R

[8]

HEDMAN B, 2002, MICROTURBINE MA 0312

[9] CARBON-MONOXIDE EMISSIONS FROM GAS-TURBINES AS INFLUENCED BY AMBIENT-TEMPERATURE AND TURBINE LOAD [J].

HUNG, WSY .

JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 1993, 115 (03) :588-593

[10]

HURA HS, 1998, 34 AIAA ASME SAE ASE

← 1 2 3 →