Collar drawing using a urethane pad

被引：7

作者：

Thiruvarudchelvan, S ^{[1
]}

Tan, MJ ^{[1
]}

机构：

[1] Nanyang Technol Univ, Sch Mech & Prod Engn, Singapore 639798, Singapore

来源：

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2004年 / 147卷 / 01期

关键词：

collars; Maslennikov's technique; flange;

D O I：

10.1016/j.jmatprotec.2003.12.010

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Collars were drawn from annular aluminum blanks of I mm thickness using an annular urethane pad and a die by applying Maslennikov's technique, developed originally for drawing very deep cups. Tests were conducted to determine the effectiveness of this new technique of collar drawing. The inner diameters of the blank were varied to determine the optimum conditions for the process. Inspection after each loading cycle in interrupted tests shows the progressive deformation of the collar. Thickness variations were also measured. Results from these preliminary experiments are presented. (C) 2004 Elsevier B.V. All rights reserved.

引用

页码：139 / 144

页数：6

共 15 条

[1]

CHITKARA NR, 1978, P 18 MTDR C, P347

[2]

FAKUDA M, 1972, B JSME, V15, P401

[3]

FAKUDA M, 1972, B JSME, V15, P554

[4]

FUKUDA M, 1977, B JSME, V17, P1513

[5] Friction aided deep drawing of sheet metals using polyurethane ring and auxiliary metal punch. Part 1: experimental observations on the deep drawing of aluminium thin sheets and foils [J].

Hassan, MA ;

Takakura, N ;

Yamaguchi, K .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2002, 42 (05) :625-631

[6] The formability limitation of the hole-flanging process [J].

Huang, YM ;

Chien, KH .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 117 (1-2) :43-51

[7]

JOHNSON W, 1980, ENG PLASTICITY, P6

[8]

JOHNSON W, 1977, T ASME, V99, P738

[9] Finite-element simulation of hole-flanging process of circular sheets of anisotropic materials [J].

Leu, DK .

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 1996, 38 (8-9) :917-&

[10] Influence of punch shapes on the collar-drawing process of sheet steel [J].

Leu, DK ;

Chen, TC ;

Huang, YM .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1999, 88 (1-3) :134-146

← 1 2 →