APPLICATION OF ELECTRON BEAM MELTING (EBM) IN ADDITIVE MANUFACTURING OF AN IMPELLER

被引：18

作者：

Tan, Xepeng ^{[1
]}

Kok, Yihong ^{[1
]}

Tor, S. B. ^{[1
]}

Chua, C. K. ^{[1
]}

机构：

[1] Nanyang Technol Univ, NTU Addit Mfg Ctr, Sch Mech & Aerosp Engn, Singapore 637372, Singapore

来源：

PROCEEDINGS OF THE 1ST INTERNATIONAL CONFERENCE ON PROGRESS IN ADDITIVE MANUFACTURING | 2014年

关键词：

D O I：

10.3850/978-981-09-0446-3_076

中图分类号：

Q813 [细胞工程];

学科分类号：

摘要：

An industrial impeller has been successfully fabricated by using Ti-6Al-4V ELI powder via a newly installed Arcam A2XX electron beam melting (EBM) machine. EBM was found to be preferable to build the circular or complex-shaped parts with thin walls. Several problems that frequently take place during the EBM fabrication are proposed based on the practical experience. It is found that metallization peeling-off, warpage, "swelling" and arc trips are the main reasons resulting in the failures of building jobs. It is suggested to pay close attention to the following aspects: a thorough cleanliness of the entire EBM system before start, a reasonable placement of builds on the start plate, an optimized design on geometries, etc., for a successfully built part.

引用

页码：327 / 332

页数：6

共 50 条

[41] Part re-registration during process interruption of electron beam melting additive manufacturing
Hossain, Mohammad Shojib
Mireles, Jorge
Morton, Philip
Lin, Yirong
Terrazas, Cesar A.
Wicker, Ryan B.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 96 (1-4): : 337 - 344
[42] Multivariate process capability analysis for evaluating metal additive manufacturing via electron beam melting
Ameen, Wadea
Alatefi, Moath
Al-Ahmari, Abdulrahman
Aldoukhi, Murtadha
Ghaleb, Atef M.
Alfaify, Abdullah
MATERIALS RESEARCH EXPRESS, 2024, 11 (09)
[43] Additive manufacturing of WC-13%Co by selective electron beam melting: Achievements and challenges
Konyashin, I.
Hinners, H.
Ries, B.
Kirchner, A.
Kloeden, B.
Kieback, B.
Nilen, R. W. N.
Sidorenko, D.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2019, 84
[44] Additive manufacturing of ITER first wall panel parts by two approaches: Selective laser melting and electron beam melting
Zhong, Yuan
Rannar, Lars-Erik
Wikaman, Stefan
Koptyug, Andrey
Liu, Leifeng
Cui, Daqing
Shen, Zhijian
FUSION ENGINEERING AND DESIGN, 2017, 116 : 24 - 33
[45] Electron beam sintering of ceramics for additive manufacturing
Klimov, A. S.
Bakeev, I. Yu
Dvilis, E. S.
Oks, E. M.
Zenin, A. A.
VACUUM, 2019, 169
[46] Review on electron beam based additive manufacturing
Negi, Seema
Nambolan, Athul Arun
Kapil, Sajan
Joshi, Prathamesh Shreekant
Manivannan, R.
Karunakaran, K. P.
Bhargava, Parag
RAPID PROTOTYPING JOURNAL, 2020, 26 (03) : 485 - 498
[47] Assessment of Cost and Energy Requirements of Electron Beam Melting (EBM) and Machining Processes
Priarone, Paolo C.
Robiglio, Matteo
Ingarao, Giuseppe
Settineri, Luca
SUSTAINABLE DESIGN AND MANUFACTURING 2017, 2017, 68 : 723 - 735
[48] Towards stiffness prediction of cellular structures made by electron beam melting (EBM)
Suard, M.
Lhuissier, P.
Dendievel, R.
Blandin, J. -J.
Vignat, F.
Villeneuve, F.
POWDER METALLURGY, 2014, 57 (03) : 190 - 195
[49] Additive Vacuum Electronics Electron Beam Melting of Copper
Gamzina, D.
Luhmann, N. C., Jr.
Ledford, C.
Horn, T.
Karakaut, I
Lin, L.
Frigola, P.
2017 EIGHTEENTH INTERNATIONAL VACUUM ELECTRONICS CONFERENCE (IVEC), 2017,
[50] Additive manufacturing of a high niobium-containing titanium aluminide alloy by selective electron beam melting
Tang, H. P.
Yang, G. Y.
Jia, W. P.
He, W. W.
Lu, S. L.
Qian, M.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 636 : 103 - 107

← 1 2 3 4 5 →