Beneficial effect of B on hot ductility of 20CrMnTi steel with 0.05% Sn

被引：5

作者：

Peng, Hongbing ^{[1
]}

Chen, Weiqing ^{[1
]}

Chen, Lie ^{[2
]}

Guo, Dong ^{[2
]}

机构：

[1] Univ Sci & Technol Beijing, State Key Lab Adv Met, Beijing 100083, Peoples R China

[2] Xining Special Steel Co Ltd, Xining 810005, Peoples R China

来源：

METALLURGICAL RESEARCH & TECHNOLOGY | 2014年 / 111卷 / 04期

关键词：

Boron; tin; hot ductility; 20CrMnTi steel; AUSTENITIC STAINLESS-STEEL; GRAIN-BOUNDARY SEGREGATION; TRANSVERSE CRACKING; BORON;

D O I：

10.1051/metal/2014027

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The beneficial effect of B on the hot ductility of 20CrMnTi steel with 0.05% Sn was investigated. The results show that there is a trough in the hot ductility-temperature curve. With the increase in the B content, the trough shifts to a lower temperature and becomes shallow, and the hot brittle range becomes narrow. In addition, B greatly enhancing the hot ductility was due mainly to its suppressing the Sn segregation, retarding the austenite/ferrite deformation, accelerating the onset of dynamic recrystallization (DRX) and promoting the intragranular nucleation of ferrite. Moreover, in the present case, adding 92 ppm B can nucleation of ferrite. Moreover, in the present case, adding 92 ppm B can obtain the best effect in improving the hot ductility of 20CrMnTi steel with 0.05% Sn.

引用

页码：221 / 227

页数：7

共 23 条

[11] Hot ductility of steels and its relationship to the problem of transverse cracking in continuous casting [J].

Mintz, B. ;

Crowther, D. N. .

INTERNATIONAL MATERIALS REVIEWS, 2010, 55 (03) :168-196

[12]

MINTZ B, 1986, MATER SCI TECH SER, V2, P589, DOI 10.1179/026708386790329037

[13] HOT DUCTILITY OF STEELS AND ITS RELATIONSHIP TO THE PROBLEM OF TRANSVERSE CRACKING DURING CONTINUOUS-CASTING [J].

MINTZ, B ;

YUE, S ;

JONAS, JJ .

INTERNATIONAL MATERIALS REVIEWS, 1991, 36 (05) :187-217

[14] The influence of composition on the hot ductility of steels and to the problem of transverse cracking [J].

Mintz, B .

ISIJ INTERNATIONAL, 1999, 39 (09) :833-855

[15]

Okamoto H., 2000, DESK HDB PHASE DIAGR

[16] Effect of Tin on Hot Ductility and High-temperature Oxidation Behavior of 20CrMnTi Steel [J].

Peng Hong-bing ;

Chen Wei-qing ;

Chen Lie ;

Guo Dong .

HIGH TEMPERATURE MATERIALS AND PROCESSES, 2014, 33 (02) :179-185

[17]

SALTER WJM, 1966, J IRON STEEL I, V204, P478

[18] Effect of boron on the hot ductility of 2.25Cr1Mo steel [J].

Song, SH ;

Guo, AM ;

Shen, DD ;

Yuan, ZX ;

Liu, J ;

Xu, TD .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 360 (1-2) :96-100

[19] The role of tin in the hot-ductility deterioration of a low-carbon steel [J].

Song, SH ;

Yuan, ZX ;

Jia, J ;

Guo, AM ;

Shen, DD .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2003, 34A (08) :1611-1616

[20] SN SEGREGATION AT GRAIN-BOUNDARY AND INTERFACE BETWEEN MNS AND MATRIX IN FE-3 MASS PERCENT-SI ALLOYS DOPED WITH TIN [J].

SUZUKI, S ;

KUROKI, K ;

KOBAYASHI, H ;

TAKAHASHI, N .

MATERIALS TRANSACTIONS JIM, 1992, 33 (11) :1068-1076

← 1 2 3 →