Multiscale simulation of thermal contact resistance in electronic packaging

被引:37
作者
Cui, Tengfei [1 ]
Li, Qiang [1 ]
Xuan, Yimin [1 ,2 ]
Zhang, Ping [1 ]
机构
[1] Nanjing Univ Sci & Technol, Sch Energy & Power Engn, Nanjing 210094, Jiangsu, Peoples R China
[2] Nanjing Univ Aeronaut & Astronaut, Coll Energy & Power Engn, Nanjing 210016, Peoples R China
基金
中国国家自然科学基金;
关键词
Thermal contact resistance; Multiscale method; Electronic packaging; INTERFACE; TRANSPORT;
D O I
10.1016/j.ijthermalsci.2014.04.006
中图分类号
O414.1 [热力学];
学科分类号
摘要
A multiscale model of thermal contact resistance (TCR) between two rough surfaces is developed. The lattice Boltzmann (LB) method and the traditional finite difference (FD) method are coupled to calculate the heat transfer between two rough surfaces. The LB method and the FD method are, respectively, applied to two different regions with different meshes (fine meshes and macro meshes). A coupling region for transmitting the boundary information between these two regions is established to ensure the continuity of physical parameters. In the multiscale model, the profile heights of actual surfaces are measured to construct the rough surface models, which have a higher accuracy than Gaussian surface. The elastic plastic mechanics is applied to calculate the deformations of rough surfaces under pressure. A series of comparisons between both the numerical and experiments results are carried out to verify the validity of the multiscale model. The results show that the TCR is synthetically affected by several factors, such as surface roughness, surface flatness, pressure, microhardness, and thermal conductivity. In those parameters, the surface roughness, flatness, and thermal conductivity of materials exert great influences on the TCR under low-pressure condition. When the pressure increases, the pressure and microhardness play dominant roles in TCR. (C) 2014 Elsevier Masson SAS. All rights reserved.
引用
收藏
页码:16 / 24
页数:9
相关论文
共 32 条
[1]  
[Anonymous], 12 INT C EL PACK TEC
[2]   Thermal contact resistance at low contact pressure: Effect of elastic deformation [J].
Bahrami, M ;
Yovanovich, MM ;
Culham, JR .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2005, 48 (16) :3284-3293
[3]   Modeling thermal contact resistance: A scale analysis approach [J].
Bahrami, M ;
Culham, JR ;
Yovanovich, MM .
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2004, 126 (06) :896-905
[4]  
Bahrami M., 2003, ASME INT MECH ENG C
[5]  
Bahrami M., 2004, ASME STLE INT JOINT
[6]   Analysis of thermal contact resistance between polymer and mold in injection molding [J].
Bendada, A ;
Derdouri, A ;
Lamontagne, M ;
Simard, Y .
APPLIED THERMAL ENGINEERING, 2004, 24 (14-15) :2029-2040
[7]   Analysis and prediction of constriction resistance for contact between rough engineering surfaces [J].
Black, AF ;
Singhal, V ;
Garimella, SV .
JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, 2004, 18 (01) :30-36
[8]   Multiscale Lattice Boltzmann Modeling of Phonon Transport in Crystalline Semiconductor Materials [J].
Christensen, Adam ;
Graham, Samuel .
NUMERICAL HEAT TRANSFER PART B-FUNDAMENTALS, 2010, 57 (02) :89-109
[9]   On the existence of a thermal contact resistance at the tool-chip interface in dry cutting of AISI 1045: Formation mechanisms and influence on the cutting process [J].
Courbon, C. ;
Mabrouki, T. ;
Rech, J. ;
Mazuyer, D. ;
D'Eramo, E. .
APPLIED THERMAL ENGINEERING, 2013, 50 (01) :1311-1325
[10]   Multi-length and time scale thermal transport using the lattice Boltzmann method with application to electronics cooling [J].
Escobar, RA ;
Ghai, SS ;
Jhon, MS ;
Amon, CH .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2006, 49 (1-2) :97-107