Surface treatments for boriding of Ti6Al4V alloy in view of applications as a biomaterial

被引：21
|
作者：
Peretti, V [1 ]
Ferraris, S. [1 ]
Gautier, G. [2 ]
Hellmich, C. [3 ]
Lahayne, O. [3 ]
Stella, B. [4 ]
Yamaguchi, S. [5 ]
Spriano, S. [1 ]
机构：
[1] Politecn Torino, DISAT, Corso Duca Abruzzi 24, I-10129 Turin, Italy
[2] CNR, Str Cacce 73, I-10135 Turin, Italy
[3] Tech Univ Wien, Karlspl 13, A-1040 Vienna, Austria
[4] Univ Torino, Dipartimento Sci & Tecnol Farmaco, Via Pietro Giuria 9, I-10125 Turin, Italy
[5] Chubu Univ, Dept Biomed Sci, Ctr Clin Examinat Practicum Biomed Sci, 200 Matsumoto Cho, Kasugai, Aichi 4878501, Japan
来源：
TRIBOLOGY INTERNATIONAL | 2018年 / 126卷
关键词：
Coating; Scratch test; Nanoindentation; SOLID-STATE DIFFUSION; TITANIUM; CORROSION; WEAR;
D O I：
10.1016/j.triboint.2018.05.006
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Even if Ti6Al4V has great biocompatibility, it cannot be used for several components of joint implants because of low wear and fretting resistance. This research is focused on improving the bio-tribological characteristics of Ti6Al4V alloy through a surface boriding process. The borided coating was characterized by microstructural and chemical analyses, hardness and adhesion tests. Adsorption of albumin was verified by surface zeta potential vs pH for characterizing interaction with physiological natural lubricants. A heat treatment at temperature near or above the beta transus allows to obtain a performant coating (thickness, hardness, adhesion) even if a change in microstructure of the substrate occurs.
引用
收藏
页码：21 / 28
页数：8
相关论文
共 50 条
  • [1] Surface Modification of Ti6Al4V Alloy by Pack Boriding
    Atar, Erdem
    Kayali, E. Sabri
    Cimenoglu, Huseyin
    TMS 2009 138TH ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 3: GENERAL PAPER SELECTIONS, 2009, : 601 - +
  • [2] Influence of Surface Treatments on Fatigue Strength of Ti6Al4V Alloy
    Takahashi, Kyo
    Sato, Eiichi
    MATERIALS TRANSACTIONS, 2010, 51 (04) : 694 - 698
  • [3] Effects of boriding on cavitation erosion resistance of Ti6Al4V alloy
    Shi, Ye-Ting
    Cui, Zhen-Duo
    Yuan, Xu-Bo
    Yang, Xianjin
    ENGINEERING MATERIALS VII, 2014, 573 : 61 - 67
  • [4] Surface characterization and preparation of Ta coating on Ti6Al4V alloy
    Yu, Xiaoming
    Tan, Lili
    Yang, Huazhe
    Yang, Ke
    JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 644 : 698 - 703
  • [5] Cyclic Thermal Oxidation Evaluation to Improve Ti6Al4V Surface in Applications as Biomaterial
    Carolina Aurélia Ribeiro Maestro
    Alysson Helton Santos Bueno
    Artur Mariano de Sousa Malafaia
    Journal of Materials Engineering and Performance, 2019, 28 : 4991 - 4997
  • [6] Cyclic Thermal Oxidation Evaluation to Improve Ti6Al4V Surface in Applications as Biomaterial
    Ribeiro Maestro, Carolina Aurelia
    Santos Bueno, Alysson Helton
    de Sousa Malafaia, Artur Mariano
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2019, 28 (08) : 4991 - 4997
  • [7] Anodizing of Ti6Al4V alloy for aeronautical applications
    Gomez-Mendez, M.
    Duran-Pabon, C.
    Naranjo, D. I.
    Arenas, M. A.
    Garcia-Vergara, S. J.
    III COLOMBIAN CONGRESS OF ELECTROCHEMISTRY, 2018, 1119
  • [8] Micro/Nanoscale Surface Modification of Ti6Al4V Alloy for Implant Applications
    Demirci, Selim
    Dikici, Tuncay
    Gulluoglu, Arif Nihat
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2022, 31 (02) : 1503 - 1511
  • [9] Influence of Surface Pre-treatments on Laser Welding of Ti6Al4V Alloy
    Sanchez-Amaya, J. M.
    Amaya-Vazquez, M. R.
    Gonzalez-Rovira, L.
    Botana-Galvin, M.
    Botana, F. J.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2014, 23 (05) : 1568 - 1575
  • [10] Fatigue Performance of Medical Ti6Al4V Alloy after Mechanical Surface Treatments
    Sonntag, Robert
    Reinders, Joern
    Gibmeier, Jens
    Kretzer, J. Philippe
    PLOS ONE, 2015, 10 (03):
12345