Capacitor allocation in Radial Distribution System with Time Varying ZIP Load Model and Energy Savings

In this paper, novel method based on loss sensitivity approach is utilized to determine optimal locations and size of the capacitors in radial distribution system to reduce power losses and improve voltage profile. Reduction in power loss enhances energy efficiency in distribution system also releases feeder capacity. Distribution system has combination of different type of loads (Industrial, commercial and Residential). Load models have significant impact on selecting capacitor size for better deployment of reactive power support. The main contribution of the paper is: (i) Capacitor allocation for radial distribution network using sensitivity approach, (ii) capacitor allocation and sizes calculation for radial distribution system with load growth and winter load variations, (iii) comparison of the results obtained with single and multi-capacitors placement with load growth and load variations, (iv) The loss savings and overall cost savings per annum with capacitors placement. In this paper we considered the impact of time varying load flow with realistic load model. The load growth factor is considered in the study which is essential for the planning and expansion of the existing systems. The impact of the realistic load model as ZIP load model has been considered for study of the systems. The results have been obtained for the distribution network of UK Distribution Corporation consisting of 38 buses. (C) 2015 The Authors. Published by Elsevier B.V. This is an open access article tinder the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)