Microstructure and mechanical properties of ZM6 magnesium alloy produced by extrusion of machined chips

被引：3
作者：
Wen, L. H. [1 ]
Ji, Z. S. [1 ]
Xin, M. D. [1 ]
机构：
[1] Harbin Univ Sci & Technol, Sch Mat Sci & Engn, Harbin 150040, Peoples R China
来源：
MATERIALS SCIENCE AND TECHNOLOGY | 2009年 / 25卷 / 10期
基金：
美国国家科学基金会;
关键词：
ZM6 magnesium alloy; Microstructure; Mechanical properties; Extrusion; SOLID RECYCLING PROCESS; HOT EXTRUSION; CORROSION PROPERTIES; ZR ALLOYS; MG; BEHAVIOR; STATE; CA;
D O I：
10.1179/174328408X382587
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The microstructure and room temperature mechanical properties of a ZM6 magnesium alloy produced by extrusion of machined chips were investigated. The tensile properties of the material were evaluated for the magnesium alloy in a series of tempers, including as cast, cast-T6, as extruded, extruded-T4, extruded-T5 and extruded-T6 conditions. Refined grains and broken particles during hot extrusion were attained. All the extruded alloy tempers showed better tensile properties than the cast alloy. The extruded-T4 alloy exhibited the best elongation to failure. The aging treatment resulted in an increase in tensile yield strength and ultimate tensile strength because of the dispersive particles or the fine precipitates. The morphology of the fracture surfaces was examined using scanning electron microscope.
引用
收藏
页码：1222 / 1226
页数：5
相关论文
共 50 条
[21]   Microstructure and mechanical properties of magnesium AZ31 sheets produced by extrusion [J].
Gall, Sven ;
Mueller, Soeren ;
Reimers, Walter .
INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2013, 6 (01) :187-197
[22]   Microstructure and mechanical properties of magnesium AZ31 sheets produced by extrusion [J].
Sven Gall ;
Sören Müller ;
Walter Reimers .
International Journal of Material Forming, 2013, 6 :187-197
[23]   Mechanical properties of SiC particle-AZ31B magnesium alloy machined chips composites prepared by hot extrusion after ECAP [J].
Graduate School of Science and Engineering for Research, University of Toyama, 3190 Gofuku, Toyama-shi, Toyama 930-8555 ;
不详 ;
不详 .
Keikinzoku J Jpn Inst Light Met, 2008, 3 (104-110) :104-110
[24]   Effect of Rolling Deformation on Microstructure and Mechanical Properties of As-Cast and Rolled ZM21 Magnesium Alloy [J].
Ozdemir, Umit ;
Koc, Erkan ;
Turen, Yunus ;
Elen, Levent ;
Cicek, Bunyamin ;
Saud, A. Najah .
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2023, 32 (11) :5043-5051
[25]   Effect of Accumulative Strain on Grain Refinement and Strengthening of ZM6 Magnesium Alloy During Continuous Variable Cross-Section Direct Extrusion [J].
Li, Feng ;
Shi, Wei ;
Bian, Nan ;
Wu, Hong-Bin .
ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2015, 28 (05) :649-655
[26]   MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AN AZ91 MAGNESIUM ALLOY PROCESSED THROUGH BACKWARD EXTRUSION [J].
Chalay-Amoly, A. ;
Zarei-Hanzaki, A. ;
Fatemi, S. M. .
ARCHIVES OF METALLURGY AND MATERIALS, 2018, 63 (01) :149-157
[27]   Microstructure and mechanical properties of AZ91D magnesium alloy prepared by compound extrusion [J].
Chen, Qiang ;
Zhao, Zhixiang ;
Shu, Dayu ;
Zhao, Zude .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (10-11) :3930-3934
[28]   Effects of extrusion temperature on microstructure, texture and mechanical properties of Mg-Bi magnesium alloy [J].
Huang, Hao ;
Zhong, Jin .
MATERIALS RESEARCH EXPRESS, 2019, 6 (11)
[29]   Effect of heat treatment on microstructure and mechanical properties of extruded ZM61 magnesium alloy [J].
Qi, F. G. ;
Zhang, D. F. ;
Zhu, Z. T. ;
Xu, X. X. ;
Shi, G. L. .
MATERIALS SCIENCE AND TECHNOLOGY, 2012, 28 (12) :1426-1433
[30]   Effects of Ce on As-cast and Extrusion Microstructure of ZM21 Magnesium Alloy [J].
Li, Quan ;
Zhu, Weibo ;
Jiang, Aimin ;
Zeng, Bin .
PROCEEDINGS OF THE 4TH INTERNATIONAL CONFERENCE ON MECHATRONICS, MATERIALS, CHEMISTRY AND COMPUTER ENGINEERING 2015 (ICMMCCE 2015), 2015, 39 :2277-2280
12345