Mixed mode crack tip parameters for different wheel positions relative to a vertical crack at the rail foot

Finite element method is used to analyze a rail with a vertical bottom up crack at its foot, under the axle load and surface traction of a wheel. The possibility of crack formation at the foot of the rail in the neighborhood of a welding connection is discussed. A brief review on the importance of T-stress in brittle fracture is presented. Seven cases with different locations of the crack relative to rail's sleeper contact region are considered. Numerous positions of the wheel are considered, and in each case, 3 crack parameters , and T-stress are calculated. Then, the biaxiality ratio and the mixity parameter for each loading and crack condition are calculated. It is shown that the location of crack and wheel can create mixed mode loading in the cracked rail and that the magnitude of crack tip parameters are strongly dependent on these geometric variables. In particular, the magnitudes of T-stress and biaxiality ratio are significant in some cases. The effect of friction between the crack faces in the presence of compressive mode I loading on the mode II stress intensity factor is studied. Under mixed mode loading, due to the axle load and surface traction, the most critical condition is the formation of vertical cracks near the sleeper contact region.