Microstructure and Property Modification of Cold Sprayed Coatings Using Different Grain Sizes of Cr3C2-25(Ni20Cr) Composite Powder

被引：6

作者：

Trelka, Anna ^{[1
]}

Zorawski, Wojciech ^{[2
]}

Goral, Anna ^{[1
]}

机构：

[1] Polish Acad Sci, Inst Met & Mat Sci, Ul Reymonta 25, PL-30059 Krakow, Poland

[2] Kielce Univ Technol, Laser Proc Res Ctr, Kielce, Poland

来源：

STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING | 2020年 / 66卷 / 09期

关键词：

Cr3C2-25(Ni20Cr) composite coating; cold spraying; microstructure; powder grain size; standoff distance; mechanical properties; DEPOSITION; MORPHOLOGY; BEHAVIOR; NI;

D O I：

10.5545/sv-jme.2020.6688

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

This article describes the microstructure and mechanical properties of Cr3C2-25(Ni20Cr) cermet coatings cold-sprayed on Al 7075 alloy substrates. The study aimed to determine the effect of three different powder grain sizes and three different standoff distances on the microstructure (phase composition, surface topography, volume fraction and distribution of the Cr3C2 phase in the Ni20Cr matrix and porosity) and the mechanical properties (hardness and abrasive wear resistance) of the Cr3C2-25(Ni20Cr) coatings. The examinations revealed that the thickness of the coatings obtained with the same duration and feed rate decreased with increasing powder grain size and standoff distance. The coatings produced from powders with smaller particles had higher hardness and more compact structures than the coatings obtained from powders where the particles were larger (more than 40 mu m). The coatings produced from finer powders were also more resistant to abrasive wear.

引用

页码：494 / 504

页数：11

共 31 条

[1] Cold Spray Deposition of Ni and WC-Reinforced Ni Matrix Composite Coatings
Alidokht, S. A.
Vo, P.
Yue, S.
Chromik, R. R.
[J]. JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2017, 26 (08) : 1908 - 1921
[2] ASM International Handbook Committee, 2004, THERM SPRAY TECHN AS
[3] Celotto S, 2007, WOODHEAD PUBL MATER, P72, DOI 10.1533/9781845693787.1.72
[4] Champagne VK, 2007, WOODHEAD PUBL MATER, P1, DOI 10.1533/9781845693787.1
[5] EN ISO, 2018, 650712018 EN ISO
[6] Effect of Particle Morphology on Cold Spray Deposition of Chromium Carbide-Nickel Chromium Cermet Powders
Fernandez, Ruben
Jodoin, Bertrand
[J]. JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2017, 26 (06) : 1356 - 1380
[7] Effect of powder morphology on the microstructure and properties of cold sprayed Ni coatings
Goral, A.
Zorawski, W.
Czaja, P.
Litynska-Dobrzynska, L.
Makrenek, M.
Kowalski, S.
[J]. INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2019, 110 (01) : 49 - 59
[8] Study of the microstructure of plasma sprayed coatings obtained from Al2O3-13TiO2 nanostructured and conventional powders
Goral, A.
Zorawski, W.
Litynska-Dobrzynska, L.
[J]. MATERIALS CHARACTERIZATION, 2014, 96 : 234 - 240
[9] MICROSTRUCTURE OF Al2O3-13TiO2 COATINGS DEPOSITED FROM NANOPARTICLES BY PLASMA SPRAYING
Goral, A.
Litynska-Dobrzynska, L.
Zorawski, W.
Berent, K.
Wojewoda-Budka, J.
[J]. ARCHIVES OF METALLURGY AND MATERIALS, 2013, 58 (02) : 335 - 339
[10] Grujicic M, 2007, WOODHEAD PUBL MATER, P148, DOI 10.1533/9781845693787.2.148

← 1 2 3 4 →