Study on Vibration Characteristic of the Marine Beveloid Gear RV Reducer

被引：1
|
作者：
Wen, Jianmin [1 ]
Cui, Haiyue [1 ]
Yang, Tong [1 ]
机构：
[1] Harbin Inst Technol, Sch Naval Architecture & Ocean Engn, Weihai 264209, Peoples R China
来源：
6TH INTERNATIONAL CONFERENCE ON COMPUTER-AIDED DESIGN, MANUFACTURING, MODELING AND SIMULATION (CDMMS 2018) | 2018年 / 1967卷
基金：
中国国家自然科学基金;
关键词：
DYNAMICS;
D O I：
10.1063/1.5039065
中图分类号：
O59 [应用物理学];
学科分类号：
摘要：
The paper focuses on the vibration characteristic of the marine beveloid gear RV reducer and provides the theoretical guidance for vibration reduction. The cycloid gears are replaced by the beveloid gears in the transmission system. Considering the impact of the backlash, time-varying meshing stiffness and transmission error, a three-dimensional lumped parameter dynamic model of the marine beveloid gear RV reducer is established. The dynamic differential equations are solved through the 4th-5th order Runge-Kutta numerical integration method. By comparing the change of the time displacement curves and amplitude curves, the impact of the external and internal excitation on the system vibration characteristic is investigated.
引用
收藏
页数：7
相关论文
共 50 条
  • [31] Vibration and noise characteristics of a gear reducer under different operation conditions
    Zhou, Jianxing
    Sun, Wenlei
    Cao, Li
    JOURNAL OF LOW FREQUENCY NOISE VIBRATION AND ACTIVE CONTROL, 2019, 38 (02) : 574 - 591
  • [32] Vibration and noise radiation analysis for a gear reducer considering meshing impact
    Zhang, Jin-Mei
    Liu, Geng
    Zhou, Jian-Xing
    Tong, Rui-Ting
    Zhang, J.-M., 1600, Chinese Vibration Engineering Society (32): : 118 - 122
  • [33] Dynamic modeling and vibration analysis of an RV reducer with defective needle roller bearings
    Xu, Lixin
    Xia, Chen
    Chang, Le
    ENGINEERING FAILURE ANALYSIS, 2024, 157
  • [34] Study on building a prototype of robot used RV reducer
    Li, W
    Li, X
    Tang, XY
    PROCEEDINGS OF THE WORLD ENGINEERS' CONVENTION 2004, VOL G, ECOLOGICAL AND GREEN MANUFACTURING, 2004, : 222 - 227
  • [35] Slicing Principle and Cutter Design for the Arc Internal Tooth of Pin Gear Housing in RV Reducer
    Wang, Peng
    2019 2ND WORLD CONFERENCE ON MECHANICAL ENGINEERING AND INTELLIGENT MANUFACTURING (WCMEIM 2019), 2019, : 335 - 338
  • [36] Contact Analysis of Cycloidal-pin Gear of RV Reducer Under the Influence of Profile Error
    Li, Tianxing
    Wang, Guofeng
    Deng, Xiaozhong
    An, Xiaotao
    Xing, Chunrong
    Ma, Wensuo
    2018 INTERNATIONAL CONFERENCE ON COMPUTER INFORMATION SCIENCE AND APPLICATION TECHNOLOGY, 2019, 1168
  • [37] A new foundation design approach as a vibration reducer for marine gensets
    Yucel, Adil
    Arpaci, Alaeddin
    Degirmenci, Serdar
    Tuzdengi, Tolga
    SHIPS AND OFFSHORE STRUCTURES, 2020, 15 (01) : 89 - 98
  • [38] Nonlinear torsional vibration modeling and bifurcation characteristic study of a planetary gear train
    Li T.
    Zhu R.
    Bao H.
    Xiang C.
    Liu H.
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2011, 47 (21): : 76 - 83
  • [39] Study on Off-Line Meshing-in Impact Characteristics of Cycloid-Pin Gear Drive Mechanism of RV Reducer
    Ji S.
    Li J.
    Zhang Y.
    Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University, 2023, 57 (09): : 123 - 132
  • [40] Development of abnormal diagnosis and factory evaluation standards for RV reducer based on vibration characteristics
    Wang, Xin
    Li, Chunlei
    Lin, Suben
    SCIENTIFIC REPORTS, 2025, 15 (01):
12345