Effect of Calcination Conditions on Crystalline Structure and Pore Size Distribution for a Mesoporous Alumina

被引：22

作者：

Ravanchi, Maryam Takht ^{[1
]}

Fard, Maryam Rahimi ^{[1
]}

Rayeeni, Siyavash Fadaee ^{[1
]}

Yaripour, Fereidoon ^{[1
]}

机构：

[1] Natl Petrochem Co, Petrochem Res & Technol Co, Catalyst Res Grp, Tehran, Iran

来源：

CHEMICAL ENGINEERING COMMUNICATIONS | 2015年 / 202卷 / 04期

关键词：

Pore size distribution; Alumina; Calcination temperature; Crystalline structure; ALPHA-PHASE TRANSFORMATION; THETA-PHASE; SEEDED BOEHMITE; ALPHA-AL2O3; GROWTH; TRANSITION; POWDERS; GEL; PARTICLES; EVOLUTION;

D O I：

10.1080/00986445.2013.850577

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

In this article, a mesoporous commercial alumina was calcined in the temperature range of 600 degrees C-1200 degrees C. The effect of several parameters such as calcination temperature, calcination time, heating rate, and calcination steps on phase transformation and crystal size was experimentally investigated. The characterization of the commercial mesoporous alumina and samples calcined at 1000 degrees C, 1040 degrees C, 1070 degrees C, 1100 degrees C, and 1200 degrees C by single-step and multi-step calcination was performed using XRD and N-2 adsorption/desorption techniques. For the commercial mesoporous alumina, TG/DTA analysis was also performed. Experimental results showed that mostly pure alpha-Al2O3 was obtained at 1100 degrees C.

引用

页码：493 / 499

页数：7

共 50 条

[21] Synthesis and characterization of mesoporous alumina materials with large pore size prepared by a double hydrolysis route
Lesaint, Cedric
Kleppa, Goril
Arla, David
Glomm, Wilhelm R.
Oye, Gisle
MICROPOROUS AND MESOPOROUS MATERIALS, 2009, 119 (1-3) : 245 - 251
[22] Effect of Pore Structure on the Nitridation of Mesoporous Silica with Ammonia
Hayashi, Fumitaka
Ishizu, Ken-ichi
Iwamoto, Masakazu
EUROPEAN JOURNAL OF INORGANIC CHEMISTRY, 2010, (15) : 2235 - 2243
[23] The Dependence of Pore Size Distribution on Porosity in Hot Isostatically Pressed Porous Alumina
Y.B.P. Kwan
D.J. Stephenson
J.R. Alcock
Journal of Porous Materials, 2001, 8 : 119 - 127
[24] The relationship between the pore size distribution and the thermo-mechanical properties of high alumina refractory castables
Li, Yaxiong
Li, Xiangcheng
Zhu, Boquan
Chen, Pingan
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2016, 107 (03) : 263 - 268
[25] Effect of particle size distribution of raw powders on pore size distribution and bending strength of Al2O3 microfiltration membrane supports
Chang, Qibing
Yang, Yulong
Zhang, Xiaozhen
Wang, Yongqing
Zhou, Jian-er
Wang, Xia
Cerneaux, Sophie
Zhu, Li
Dong, Yingchao
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2014, 34 (15) : 3819 - 3825
[26] Preparation of alumina with high specific surface area and narrow pore size distribution II. Effect of silica
Du, MX
Zhai, XZ
Li, Y
Li, LD
Zhu, HQ
Tan, CY
CHINESE JOURNAL OF CATALYSIS, 2002, 23 (05) : 469 - 472
[27] The dependence of pore size distribution on porosity in hot isostatically pressed porous alumina
Kwan, YBP
Stephenson, DJ
Alcock, JR
JOURNAL OF POROUS MATERIALS, 2001, 8 (02) : 119 - 127
[28] The effect of surfactant type and concentration on the pore structure of alumina aerogels
Jung, Hae-Noo-Ree
Choi, Haryeong
Kim, Sang-Hyun
Jung, Wook Ki
Park, Hyung-Ho
JOURNAL OF NON-CRYSTALLINE SOLIDS, 2023, 610
[29] Combined influence of pore size distribution and surface hydrophilicity on the water adsorption characteristics of micro- and mesoporous silica
Saliba, Sarmenio
Ruch, Patrick
Volksen, Willi
Magbitang, Teddie P.
Dubois, Geraud
Michel, Bruno
MICROPOROUS AND MESOPOROUS MATERIALS, 2016, 226 : 221 - 228
[30] Effect of particle size distribution of alumina on strength of glass-infiltrated alumina
Lim, Hyung Bong
Cho, Won-Seung
Kim, Cheol Y.
CERAMICS INTERNATIONAL, 2012, 38 (04) : 3069 - 3074

← 1 2 3 4 5 →