Ni-YSZ-supported tubular solid oxide fuel cells with GDC interlayer between YSZ electrolyte and LSCF cathode

被引：55
作者：
Park, Seung-Young [1 ]
Ahn, Jee Hyun [1 ]
Jeong, Chang-Woo [1 ]
Na, Chan Woong [1 ]
Song, Rak-Hyun [2 ]
Lee, Jong-Heun [1 ]
机构：
[1] Korea Univ, Dept Mat Sci & Engn, Seoul 136713, South Korea
[2] Korea Inst Energy Res, Fuel Cell Res Ctr, Taejon 305343, South Korea
来源：
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY | 2014年 / 39卷 / 24期
基金：
新加坡国家研究基金会;
关键词：
Gadolinia doped ceria; GDC interlayer; Carbonate coprecipitation; Tubular solid oxide fuel cell; Yttria stabilized zirconia; La0.6Sr0.4Co0.2Fe0.8O3-delta; DOPED CERIA INTERLAYER; STABILIZED ZIRCONIA ELECTROLYTE; REACTIVE CE0.8RE0.2O1.9 RE; PEROVSKITE-TYPE OXIDES; INTERMEDIATE-TEMPERATURE; CARBONATE COPRECIPITATION; YB POWDERS; PERFORMANCE; LA; CONDUCTIVITY;
D O I：
10.1016/j.ijhydene.2014.06.103
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
Highly sinterable gadolinia doped ceria (GDC) powders are prepared by carbonate coprecipitation and applied to the GDC interlayer in Ni-YSZ (yttria stabilized zirconia)-supported tubular solid oxide fuel cell in order to prevent the reaction between YSZ electrolyte and LSCF (La0.6Sr0.4Co0.2Fe0.8O3-delta) cathode materials. The formation of highly resistive phase at the YSZ/LSCF interface was effectively blocked by the low-temperature densification of GDC interlayer using carbonate-derived active GDC powders and the suppression of Sr diffusion toward YSZ electrolyte via GDC interlayer by tuning the heat-treatment temperature for cathode fabrication. The power density of the cell with the configuration of Ni-YSZ/YSZ/GDC/LSCF-GDC/LSCF was as high as 906 mW cm(-2), which was 2.0 times higher than that (455 mW cm(-2)) of the cell with the configuration of Ni-YSZ/ YSZ/LSM(La0.8Sr0.2MnO3-delta)-YSZ/LSM at 750 degrees C. Copyright (C) 2014, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：12894 / 12903
页数：10
相关论文
共 42 条
  • [1] Dip coating technique in fabrication of cone-shaped anode-supported solid oxide fuel cells
    Bai, Yaohui
    Liu, Jiang
    Gao, Hongbo
    Jin, Chao
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 480 (02) : 554 - 557
  • [2] Anisotropic constitutive laws for sintering bodies
    Bordia, RK
    Zuo, RZ
    Guillon, O
    Salamone, SM
    Rödel, J
    [J]. ACTA MATERIALIA, 2006, 54 (01) : 111 - 118
  • [3] Investigation of chemisorbed oxygen, surface segregation and effect of post-treatments on La0.8Sr0.2MnO3 powder and screen-printed layers for solid oxide fuel cell cathodes
    Caillol, N.
    Pijolat, M.
    Siebert, E.
    [J]. APPLIED SURFACE SCIENCE, 2007, 253 (10) : 4641 - 4648
  • [4] Electrochemical open circuit voltage (OCV) characterization of SOFC materials
    Chiodelli, G.
    Malavasi, L.
    [J]. IONICS, 2013, 19 (08) : 1135 - 1144
  • [5] Low-temperature preparation of dense (Gd,Ce)O2-δ-Gd2O3 composite buffer layer by aerosol deposition for YSZ electrolyte-based SOFC
    Choi, Jong-Jin
    Park, Dong-Soo
    Seong, Byeong-Geun
    Bae, Hong-Youl
    [J]. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2012, 37 (12) : 9809 - 9815
  • [6] ELECTRICAL-PROPERTIES OF CERIA-BASED OXIDES AND THEIR APPLICATION TO SOLID OXIDE FUEL-CELLS
    EGUCHI, K
    SETOGUCHI, T
    INOUE, T
    ARAI, H
    [J]. SOLID STATE IONICS, 1992, 52 (1-3) : 165 - 172
  • [7] Constrained sintering:: A delicate balance of scales
    Green, David J.
    Guillon, Olivier
    Roedel, Juergen
    [J]. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2008, 28 (07) : 1451 - 1466
  • [8] Performance improvement of (La, Sr)MnO3 and (La, Sr) x (Co, Fe)O3-type anode-supported SOFCs
    Haanappel, Vincent A. C.
    Mertens, Josef
    Mai, Andreas
    [J]. JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY, 2006, 3 (03): : 263 - 270
  • [9] Ba1-xPrxCo1-yFeyO3-δ as cathode materials for low temperature solid oxide fuel cells
    Hui, Rob
    Sun, Chunwen
    Yick, Sing
    Deces-Petit, Cyrille
    Zhang, Xinge
    Maric, Radenka
    Ghosh, Dave
    [J]. ELECTROCHIMICA ACTA, 2010, 55 (16) : 4772 - 4775
  • [10] Ce0.8Gd0.2O2-δ protecting layers manufactured by physical vapor deposition for IT-SOFC
    Jordan, N.
    Assenmacher, W.
    Uhlenbruck, S.
    Haanappel, V. A. C.
    Buchkremer, H. P.
    Stoever, D.
    Mader, W.
    [J]. SOLID STATE IONICS, 2008, 179 (21-26) : 919 - 923
12345