Research on the limitations of laser energy density and microstructure characteristics of selective laser melted AlSi10Mg alloy

被引：6
作者：
Dong, Sensen [1 ]
Zhang, Xiaoxun [1 ]
Ma, Fang [2 ]
Jiang, Juze [1 ]
Yang, Wei [1 ]
机构：
[1] Shanghai Univ Engn Sci, Sch Mat Engn, Shanghai 201620, Peoples R China
[2] Shanghai Univ Engn Sci, Sch Mech & Automot Engn, Shanghai 201620, Peoples R China
来源：
OPTIK | 2020年 / 219卷
基金：
中国国家自然科学基金;
关键词：
Selective laser melting; Track geometry; Melt pool; Microstructure; Microhardness; MECHANICAL-PROPERTIES; PROCESS PARAMETERS; SURFACE-ROUGHNESS; POWDERS; BEHAVIOR; POROSITY; DESIGN; STEEL;
D O I：
10.1016/j.ijleo.2020.165211
中图分类号：
O43 [光学];
学科分类号：
070207 ; 0803 ;
摘要：
In this study, deficiencies in using the laser energy density (LED) to combine different process parameters to represent the heat input in selective laser melting (SLM) process are proposed. The change in melt pool shape could not always be clarified by the LED input, since the vary of LED input caused by altering hatch spacing cannot change the melt pool shape. In addition, the microstructure of SLM fabricated AlSi10Mg material was observed, and this paper gives a further elucidation on the formation of the hierarchical microstructures that discriminated by the morphology of Si phase. Microhardness is enhanced by the supersaturated alpha-Al matrix, and the hardness value of coarse zones and fine zones show different performance.
引用
收藏
页数：12
相关论文
共 50 条
  • [41] A comparison between laser and TIG welding of selective laser melted AlSi10Mg
    Zhang, Changchun
    Bao, Yefeng
    Zhu, Haihong
    Nie, Xiaojia
    Zhang, Wenqi
    Zhang, Shasha
    Zeng, Xiaoyan
    OPTICS AND LASER TECHNOLOGY, 2019, 120
  • [42] Study on the Selective Laser Melting of AlSi10Mg
    Zhang Wenqi
    Zhu Haihong
    Hu Zhiheng
    Zeng Xiaoyan
    ACTA METALLURGICA SINICA, 2017, 53 (08) : 918 - 926
  • [43] On the Precipitation Hardening of Selective Laser Melted AlSi10Mg
    Nesma T. Aboulkhair
    Chris Tuck
    Ian Ashcroft
    Ian Maskery
    Nicola M. Everitt
    Metallurgical and Materials Transactions A, 2015, 46 : 3337 - 3341
  • [44] Effect of laser remelting on surface roughness and microstructure of AlSi10Mg selective laser melting manufactured parts
    Boschetto, Alberto
    Bottini, Luana
    Pilone, Daniela
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 113 (9-10) : 2739 - 2759
  • [45] Dynamic response of AlSi10Mg alloy fabricated by selective laser melting
    Zaretsky, E.
    Stern, A.
    Frage, N.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 688 : 364 - 370
  • [46] Abnormal corrosion behavior of selective laser melted AlSi10Mg alloy induced by heat treatment at 300 °C
    Gu, Xinhui
    Zhang, Junxi
    Fan, Xiaolei
    Dai, Nianwei
    Xiao, Yi
    Zhang, Lai-Chang
    JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 803 : 314 - 324
  • [47] Porosity Inducing Process Parameters in Selective Laser Melted AlSi10Mg Aluminium Alloy
    P. Ferro
    R. Meneghello
    N. Razavi
    F. Berto
    G. Savio
    Physical Mesomechanics, 2020, 23 : 256 - 262
  • [48] Effect of energy input on laser welded AlSi10Mg parts fabricated by selective laser melting
    Chang, Yaoqing
    Cui, Li
    He, Dingyong
    Zeng, Yong
    Huang, Hui
    Cao, Qing
    ADVANCED LASER PROCESSING AND MANUFACTURING III, 2019, 11183
  • [49] Change in microstructure of selectively laser melted AlSi10Mg alloy with heat treatments
    Takata, Naoki
    Kodaira, Hirohisa
    Sekizawa, Keito
    Suzuki, Asuka
    Kobashi, Makoto
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 704 : 218 - 228
  • [50] Effect of heat treatment and laser surface remelting on AlSi10Mg alloy fabricated by selective laser melting
    Han, Quanquan
    Jiao, Yang
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 102 (9-12) : 3315 - 3324
12345