Initial oxidation of duplex stainless steel

Three different techniques were used to produce thin oxide layers on polished and sputter-cleaned duplex stainless-steel samples. These samples were exposed to 10 (5) mbar of pure oxygen inside the vacuum chamber, exposed to ambient conditions for 24 h, and plasma oxidized. The oxide layers thus produced were analysed using XPS depth pro. ling in order to determine the oxide layers' compositions with depth. We found that all the techniques produce oxide layers with different traces of metallic components and with the maximum concentration of chromium oxide shifted towards the oxide-layer bulk-metal interface. A common characteristic of all the oxide layers investigated is a double-oxide strati. cation, with regions closer to the surface exhibiting higher concentrations of iron oxide and those more in-depth exhibiting higher concentrations of chromium oxide. A simple non-destructive Thickogram procedure was used to corroborate the thickness estimates for the thinnest oxide layers. (C) 2009 Elsevier B. V. All rights reserved.