Determination of rewetting velocity during jet impingement cooling of hot vertical rod

被引:13
作者
Agrawal, Chitranjan [1 ]
Kumar, Ravi [2 ]
Gupta, Akhilesh [2 ]
Chatterjee, Barun [3 ]
机构
[1] Maharana Pratap Univ Agr & Technol, Coll Technol & Engn, Dept Mech Engn, Udaipur 313001, India
[2] Indian Inst Technol Roorkee, Dept Mech & Ind Engn, Roorkee 247667, Uttar Pradesh, India
[3] Bhabha Atom Res Ctr, Reactor Safety Div, Bombay 400085, Maharashtra, India
关键词
Hot vertical rod; Stagnation point; Surface quenching; Water jet impingement; Rewetting velocity; FREE-SURFACE JET; HEAT-FLUX; HORIZONTAL SURFACE; MAXIMUM SURFACE; FILM; DIAMETER; ZONE;
D O I
10.1007/s10973-015-4905-5
中图分类号
O414.1 [热力学];
学科分类号
摘要
A vertical hot rod of 12 mm diameter at 800 +/- A 10 A degrees C initial temperature has been quenched by sub-cooled round water jet. The water jet of 2.5 and 3.5 mm diameter, at jet Reynolds number of 5000-24,000, impinges normal to the test section of SS-316. An infrared camera is used to determine the wetting front velocity on the hot test surface. The investigations are made up to 40 mm downstream locations in both upper and down sides of the stagnation point. It has been observed that during transient cooling, the wetting front velocity increases with the rise in jet Reynolds number and jet diameter. However, rewetting velocity reduces drastically for the extreme downstream locations away from the stagnation point. The reduction in the wetting front progression for the upper side downstream locations is higher as compared to corresponding bottom side locations. The correlation proposed for the dimensionless rewetting velocity predicts the experimental data of upper and bottom side downstream locations in the error band of +30 to -20 %.
引用
收藏
页码:861 / 871
页数:11
相关论文
共 30 条
[11]   COOLING OF A MOVING PLATE WITH AN IMPINGING CIRCULAR WATER JET [J].
CHEN, SJ ;
KOTHARI, J ;
TSENG, AA .
EXPERIMENTAL THERMAL AND FLUID SCIENCE, 1991, 4 (03) :343-353
[12]   May thermal imaging be useful in cyclist endurance tests? [J].
Cholewka, Armand ;
Kasprzyk, Teresa ;
Stanek, Agata ;
Sieron-Stoltny, Karolina ;
Drzazga, Zofia .
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2016, 123 (03) :1973-1979
[13]   EXPERIMENTAL INVESTIGATION OF FALLING-FILM REWETTING [J].
DUA, SS ;
TIEN, CL .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1978, 21 (07) :955-965
[14]   PHYSICS OF REWETTING IN WATER REACTOR EMERGENCY CORE COOLING [J].
DUFFEY, RB ;
PORTHOUSE, DT .
NUCLEAR ENGINEERING AND DESIGN, 1973, 25 (03) :379-394
[15]   Rewetting temperatures and velocity in a quenching experiment [J].
Filipovic, J ;
Incropera, FP ;
Viskanta, R .
EXPERIMENTAL HEAT TRANSFER, 1995, 8 (04) :257-270
[16]   Nozzle-geometry effects in liquid jet impingement heat transfer [J].
Garimella, SV ;
Nenaydykh, B .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1996, 39 (14) :2915-2923
[17]   Heat transfer from a hot moving cylinder impinged by a planar subcooled water jet [J].
Gradeck, M. ;
Kouachi, A. ;
Borean, J. L. ;
Gardin, P. ;
Lebouche, M. .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2011, 54 (25-26) :5527-5539
[18]   Jet impingement boiling from a circular free-surface jet during quenching: Part 1 - Single-phase jet [J].
Hall, DE ;
Incropera, FP ;
Viskanta, R .
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2001, 123 (05) :901-910
[19]   Experimental investigation on an axisymmetric turbulent jet impinging on a concave surface [J].
Hashiehbaf, A. ;
Baramade, A. ;
Agrawal, Amit ;
Romano, G. P. .
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 2015, 53 :167-182
[20]  
HATTA N, 1983, T IRON STEEL I JPN, V23, P555