Three-dimensional CFD (computational fluid dynamics) analysis of scavenging process in a two-stroke free-piston engine

被引:47
作者
Wu, Yining [1 ]
Wang, Yang [1 ]
Zhen, Xudong [1 ]
Guan, Shuai [1 ]
Wang, Jiancai [1 ]
机构
[1] Tianjin Univ, State Key Lab Engines, Tianjin 300072, Peoples R China
基金
中国国家自然科学基金;
关键词
Free-piston; Two-stroke; Computational fluid dynamics; Uniflow scavenging;
D O I
10.1016/j.energy.2014.02.107
中图分类号
O414.1 [热力学];
学科分类号
摘要
A HFPE (hydraulic free-piston engine) has been proposed by the SKLE (State Key Library of Engines) in Tianjin University as a mean to significantly improving the IC (Internal Combustion) engines' cycle thermal efficiency and lowering exhaust emissions. As the piston dynamic and the cylinder structure are hardly seen in conventional engine, a 3-D (three-dimensional) CFD (computational fluid dynamics) model was built to investigate the scavenging process. A wide range of structure and operating parameters were investigated including the intake port radial angle, intake port height and operating frequency. We achieved the highest scavenging efficiency 0.907 through optimization, which is 11% higher than that of the original design. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码:167 / 173
页数:7
相关论文
共 50 条
[31]   The Hydrodynamic Study of the Swimming Gliding: a Two-Dimensional Computational Fluid Dynamics (CFD) Analysis [J].
Marinho, Daniel A. ;
Barbosa, Tiago M. ;
Rouboa, Abel I. ;
Silva, Antonio J. .
JOURNAL OF HUMAN KINETICS, 2011, 29 :49-57
[32]   Analysis of the effect of bore/stroke ratio and scavenge port angles on the scavenging process in a two-stroke boosted uniflow scavenged direct injection gasoline engine [J].
Wang, Xinyan ;
Ma, Jun ;
Zhao, Hua .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 2018, 232 (13) :1799-1814
[33]   Three-dimensional analysis of nasal physiology. Representation by means of computational fluid dynamics [J].
Sommer, F. ;
Hoffmann, T. K. ;
Mlynski, G. ;
Reichert, M. ;
Grossi, A. -S. ;
Kroeger, R. ;
Lindemann, J. .
HNO, 2018, 66 (04) :280-289
[34]   The application of computational fluid dynamics to natural river channels: three-dimensional versus two-dimensional approaches [J].
Lane, SN ;
Bradbrook, KF ;
Richards, KS ;
Biron, PA ;
Roy, AG .
GEOMORPHOLOGY, 1999, 29 (1-2) :1-20
[35]   COMPARISON OF A FULL-SCALE AND A 1:10 SCALE LOW-SPEED TWO-STROKE MARINE ENGINE USING COMPUTATIONAL FLUID DYNAMICS [J].
Chuahy, Flavio Dal Forno ;
Finney, Charles E. A. ;
Kaul, Brian C. ;
Kass, Michael D. .
PROCEEDINGS OF ASME 2024 ICE FORWARD CONFERENCE, ICEF2024, 2024,
[36]   The use of three-dimensional computational fluid dynamics in the design of extrusion dies [J].
Gifford, WA .
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 1997, 16 (07) :661-674
[37]   Comparison of a Full-Scale and a 1:10 Scale Low-Speed Two-Stroke Marine Engine Using Computational Fluid Dynamics [J].
Dal Forno Chuahy, Flavio ;
Finney, Charles E. A. ;
Kaul, Brian C. ;
Kass, Michael D. .
Journal of Engineering for Gas Turbines and Power, 2025, 147 (09)
[38]   Three-dimensional Computational Fluid Dynamics Modeling of Two-phase Flow in a Structured Packing Column [J].
Zhang Xiaobin ;
Yao Lei ;
Qiu Limin ;
Zhang Xuejun .
CHINESE JOURNAL OF CHEMICAL ENGINEERING, 2013, 21 (09) :959-966
[39]   Modelling free-forming meander evolution in a laboratory channel using three-dimensional computational fluid dynamics [J].
Ruther, N. ;
Olsen, N. R. B. .
GEOMORPHOLOGY, 2007, 89 (3-4) :308-319
[40]   Stencil printing procedure using transient three-dimensional computational fluid dynamics [J].
Kim, Hyeongtae ;
Mohammadhosseinzadeh, Majid ;
Jung, Myung Keun ;
Na, Seung Ryul ;
Kang, Namhyun ;
Kim, Ji Hoon .
JOURNAL OF MANUFACTURING PROCESSES, 2025, 148 :306-316