Tensile fracture behavior of continuous SiC fiber-reinforced SiC matrix composites at elevated temperatures and correlation to in situ constituent properties

The tensile fracture behavior and tensile mechanical properties of polymer infiltration pyrolysis (PIP)-processed two-dimensional plain-woven fabric carbon-coated Nicalon(TM) SiC fiber and BN-coated Hi-Nicalon(TM) SiC fiber-reinforced SiC matrix composites have been investigated. Tensile testing of the composites was carried out in air between 298 and 1400 K. In situ fiber strength and interface shear stress were determined by fracture mirror size and pulled-out fiber length measurements. For the Nicalon/C/SiC, tensile strength remained nearly constant up to 800 K, and while the strength dropped from 140 MPa at 800 K to 41 MPa at 1200 K, with weakest link failure mode. For the Hi-Nicalon/BN/SiC, the tensile strength increased slightly with increase in test temperature up to 1200 K; however, a large decrease in the strength was observed at 1400 K. In the case of the Hi-Nicalon/BN/SiC, the fracture was governed by fiber bundle strength. The temperature dependence of tensile strength and fracture behavior of both composites was attributed to change of the in situ constituent properties with temperature. (C) 2002 Elsevier Science Ltd. All rights reserved.