Surface Modification and Ternary System Dye Removal Ability of Manganese Ferrite Nanoparticle

In this paper, the surface of magnetic manganese ferrite nanoparticles (MFN) was modified using cetyl trimethylammonium bromide (CTAB). The modified MFN was studied using Fourier transform infrared spectroscopy (FTIR). The adsorption capacity of surface modified MFN (MFN-CTAB) was investigated for dye removal for single and ternary systems. Three anionic dyes, C.I. Direct Red 80 (DR80), C.I. Direct Red 31 (DR31), and C.I. Acid Blue 92 (AB92), were used as model compounds. The effects of operational parameters on dye removal (i.e. adsorbent dosage, dye concentration and salt) and the kinetic and isotherm of dye adsorption were studied. The adsorption kinetic for the dyes was found to be well described by the pseudo-second order model. The maximum dye adsorption capacity (Q(0)) of MFN-CTAB for DR80, DR31 and AB92 was 83 mg/g, 59 mg/g and 70 mg/g, respectively. The adsorption isotherm data were analyzed using the Langmuir, Freundlich, and Temkin equations. The results revealed that the Langmuir model fitted the adsorption data better. The results showed that the MFN-CTAB as a magnetic adsorbent might be a suitable alternative to remove dyes from colored aqueous solutions.