Microstructure and mechanical behavior of 6061Al reinforced with silicon nitride particles, processed by powder metallurgy

被引：41

作者：

Amigó, V

Ortiz, JL

Salvador, MD

机构：

[1] Univ Politecn Valencia, Dept Ingn Mecan & Mat, Valencia 46022, Spain

[2] ITESM, Dept Ingn Mecan & Ind, Santiago De Queretaro 76130, Mexico

来源：

SCRIPTA MATERIALIA | 2000年 / 42卷 / 04期

关键词：

extrusion; powder consolidation; aluminium; aging;

D O I：

10.1016/S1359-6462(99)00356-5

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Metal matrix composites (MMCs) of 6061Al matrix reinforced with Si3N4 can be produced by hot extrusion of cold uniaxial pressed compacts with rare and small porosity. Mechanical properties of `as extruded' and T6 treated 6061 Al alloy matrix rods are similar to the average forged alloy ones, in spite of the low Mg content of the alloy matrix and the preferential precipitation on grain boundaries due to the fragmentation of the oxide layer. The mechanical properties of the MMCs obtained by this process have a strong limitation for high particle fractions, due mainly to the higher number of nucleation sites present for the cracks to form as a result of particle clusters.

引用

页码：383 / 388

页数：6

共 16 条

[1]

BANDINI C, 1991, J MATER SCI, V26, P6279

[2]

Borrego A, 1996, SCRIPTA MATER, V34, P471, DOI 10.1016/S0956-716X(95)00542-4

[3] EFFECT OF HOMOGENEOUS HETEROGENEOUS PRECIPITATION ON AGING BEHAVIOR OF SICP/AL 2014 COMPOSITE [J].