Design and Implementation of Printed Monopole Antenna for Portable Devices

被引：0

作者：

Nasir, Jamal ^{[1
]}

Jamaluddin, Mohd H. ^{[1
]}

Khan, Imdad ^{[2
]}

Kamarudin, Muhammad R. ^{[1
]}

Hussain, Muzammil ^{[2
]}

机构：

[1] Univ Teknol Malaysia, WCC, Skudai, Johor, Malaysia

[2] COMSATS Inst Informat Technol, Dept Elect Engn, Abbottabad, Pakistan

来源：

PIERS 2014 GUANGZHOU: PROGRESS IN ELECTROMAGNETICS RESEARCH SYMPOSIUM | 2014年

关键词：

D O I：

暂无

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

Ultra-wideband (UWB) has been identified as the future technology. Mostly, bandwidth critical applications such as sensor data collection and location tracking can benefit from the advantageous, highly wide bandwidth of the UWB technology. It is very challenging for the antenna engineers to reduce the size of the antenna while maintaining the performance parameters such as low voltage standing wave ratio (VSWR), wide bandwidth and symmetric radiation patterns. In this paper, a novel, compact printed monopole antenna has been proposed for the portable wireless communication devices. The operating frequency range of the proposed antenna spans from 3-12 GHz, covering the entire frequency range of the UWB spectrum whose range is from 3.1-10.6 GHz. The simulated results of proposed antenna shows good conformity with measured results. The antenna has been etched out in the middle of the radiating patch to form a slot. Moreover, the size of the ground plane has also been reduced. These techniques have been effective to widen the bandwidth of this compact antenna for UWB operation.

引用

页码：2753 / 2757

页数：5

共 13 条

[1]

[Anonymous], 2002, FCC REP ORD 15

[2] Small printed ultrawideband antenna with reduced ground plane effect [J].