Experimental assessment of Textile Reinforced Sprayed Mortar strengthening system for brickwork wallettes

被引:62
作者
Bernat-Maso, Ernest [1 ]
Escrig, Christian [1 ]
Aranha, Chrysl A. [2 ]
Gil, Lluis [1 ]
机构
[1] Tech Univ Catalonia, Dept Strength Mat & Engn Struct, Terrassa 08222, Spain
[2] Univ Minho, IS1SE, Dept Civil Engn, Guimaraes, Portugal
关键词
Textile Reinforced Mortar; Strengthening; Masonry; Experimental test; Application technique;
D O I
10.1016/j.conbuildmat.2013.09.031
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
This work explores the feasibility of strengthening masonry with Textile Reinforced Mortar (TRM) by projecting it to save application time. Nineteen tests on masonry samples strengthened with TRM have been carried out to assess this new application method. Different mortars and fibre grids were considered for studying their influence and applicability with this new technique. Three points bending tests have been performed on the specimens to compare the flexural strength between cases with manually applied mortar (TRM) and sprayed application (TRSM) of the mortar layer. It was noticed that the strengthening mortar has a significant influence on the failure mode. Results show a remarkable (between 2 and 6 times more) productivity increase when using TRSM and a load-bearing capacity rise for the cases with larger grid spacing and projectable mortar when using TRSM instead of TRM. Greater ductility values were also observed for the TRSM cases in comparison with the analogue TRM cases (same grid and mortar). (C) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码:226 / 236
页数:11
相关论文
共 50 条
[41]   In-situ experimental tests on masonry panels strengthened with Textile Reinforced Mortar composites [J].
Carozzi, Francesca Giulia ;
D'Antino, Tommaso ;
Poggi, Carlo .
XIV INTERNATIONAL CONFERENCE ON BUILDING PATHOLOGY AND CONSTRUCTIONS REPAIR, 2018, 11 :355-362
[42]   Optimized Hybrid Carbon-Glass Textile-Reinforced Mortar for Flexural and Shear Strengthening of RC Members [J].
Koutas, Lampros N. ;
Cholostiakow, Szymon ;
Bournas, Dionysios A. ;
Raoof, Saad ;
Tetta, Zoi .
JOURNAL OF COMPOSITES FOR CONSTRUCTION, 2024, 28 (01)
[43]   Textile-Reinforced Mortar Strengthening of Masonry Piers Containing Industrial Waste Coal Gangue Sintered Bricks [J].
Jing, Lei ;
Yin, Shi-ping ;
Aslani, Farhad .
JOURNAL OF COMPOSITES FOR CONSTRUCTION, 2022, 26 (02)
[44]   Experimental and analytical study of reinforced concrete beams shear strengthened with different types of textile-reinforced mortar [J].
Escrig, Christian ;
Gil, Lluis ;
Bernat-Maso, Ernest ;
Puigvert, Francesc .
CONSTRUCTION AND BUILDING MATERIALS, 2015, 83 :248-260
[45]   Experimental and analytical investigation on strengthening of heat damaged concrete by textile reinforced concrete (TRC) [J].
Esmaeili, J. ;
Sharifi, I ;
Kasaei, J. ;
Nourizadeh, M. ;
Emamieh, A. Ebrahimi .
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2019, 19 (04) :1468-1483
[46]   TEXTILE REINFORCED MORTAR SYSTEM AS A MEANS FOR CONFINEMENT OF MASONRY STRUCTURES EXPOSED TO ELEVATED TEMPERATURES [J].
Theofanis, Krevaikas D. .
M2D2015: PROCEEDINGS OF THE 6TH INTERNATIONAL CONFERENCE ON MECHANICS AND MATERIALS IN DESIGN, 2015, :1775-1788
[47]   Experimental investigation on concrete overlaid with textile reinforced mortar: Influences of mix, temperature, and chemical exposure [J].
Smitha Gopinath ;
Ramesh Gopal ;
Hemalatha Thiyagarajan .
Frontiers of Structural and Civil Engineering, 2023, 17 :271-283
[48]   Textile Reinforced Mortar-to-masonry bond: Experimental investigation of bond-critical parameters [J].
Askouni, Paraskevi D. ;
Papanicolaou, Catherine G. .
CONSTRUCTION AND BUILDING MATERIALS, 2019, 207 :535-547
[49]   Experimental investigation on concrete overlaid with textile reinforced mortar: Influences of mix, temperature, and chemical exposure [J].
Gopinath, Smitha ;
Gopal, Ramesh ;
Thiyagarajan, Hemalatha .
FRONTIERS OF STRUCTURAL AND CIVIL ENGINEERING, 2023, 17 (02) :271-283
[50]   Flexural Strengthening of Two-Way RC Slabs with Cut Openings Using Textile-Reinforced Mortar Composites [J].
Koutas, Lampros N. ;
Bournas, Dionysios A. .
JOURNAL OF COMPOSITES FOR CONSTRUCTION, 2021, 25 (03)