Enhanced piezoelectric coefficient and mechanical performance of Pb(Ni1/3Nb2/3)O3-PbZrO3-PbTiO3 ferroelectric ceramics by Pb(Mn1/3Sb2/3)O3 modification

Pb(Mn1/3Sb2/3)O-3-modified (<= 4 mol%) ferroelectric ceramics 0.5Pb(Ni1/3Nb2/3)O-3-0.14PbZrO(3)-0.36PbTiO(3) were successfully fabricated by the solid-state reaction method to investigate its influences on the phase structure and piezoelectricity as well as mechanical properties. The addition of Pb(Mn1/3Sb2/3)O-3 (PMS) led to a phase transformation from tetragonal to rhombohedral and a slightly increased average grain size. The compositions modified by PMS mainly displayed "harden" effect, accompanying with the increase of mechanical quality factor Qm and internal bias field Ei. The mechanical properties of the ceramics were strengthened monotonously with the addition of PMS, while the piezoelectric coefficient showed a peak value of d*3 similar to 1058 pm/V when the PMS content equaled to 1 mol%. Fairly good electrical properties and mechanical performance of d*3 similar to 1036 pm/V (E = 1 kV/mm), planar electromechanical coupling factor k(p)similar to 0.53, dielectric loss (1 kHz)similar to 0.4%, Young's modulus E similar to 120.8 GPa, fracture toughness K-IC similar to 1.44 MPa M-1/2 were achieved in the sample with the addition of 2 mol% PMS, which makes it promising for applications in piezoactuators, transducers and sensors. (C) 2015 Elsevier Ltd and Techna Group S.r.l. All rights reserved.