OPTIMAL ELECTRODE POSITION FOR DELAMINATION DETECTION IN CARBON FIBRE REINFORCED POLYMER COMPOSITES USING ELECTRIC RESISTANCE CHANGE METHOD

被引：0

作者：

Kovalovs, Andrejs ^{[1
]}

Chate, Andris ^{[1
]}

机构：

[1] Riga Tech Univ, Riga, Latvia

来源：

18TH INTERNATIONAL SCIENTIFIC CONFERENCE ENGINEERING FOR RURAL DEVELOPMENT | 2019年

关键词：

CFRP; delamination; electrical resistance; non-destructive; ANSYS; LAMINATE;

D O I：

10.22616/ERDev2019.18.N234

中图分类号：

S2 [农业工程];

学科分类号：

0828 ;

摘要：

The electric resistance measure by the four probe method is used by various researchers for detection of the internal delamination in laminated carbon-fiber-reinforced polymers composite material. In the present study, the effect of spacing between probes on the crack detection efficiency has been investigated. The problem has been solved by the method of planning of the experiment and the response surface method by using the 2-D finite element model. The distance between the probes and the crack length has been selected as the parameter of the study. As a result, it was revealed, that in case of the crack growth, a decrease in the distance between the current and voltage probes has a greater effect on the detection of the crack than the change in the distance between only the current probes.

引用

页码：1180 / 1185

页数：6

共 14 条

[1] Eglajs V., 1981, Problems of Dynamics and Strength, V39, P120
[2] A review of non-destructive testing methods of composite materials
Gholizadeh, S.
[J]. XV PORTUGUESE CONFERENCE ON FRACTURE, PCF 2016, 2016, 1 : 50 - 57
[3] Statistical evaluation of modified electrical resistance change method for delamination monitoring of CFRP plate
Iwasaki, A
Todoroki, A
[J]. STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 2005, 4 (02): : 119 - 136
[4] Modelling the electrical resistance change in a multidirectional laminate with a delamination
Panozzo, Francesco
Zappalorto, Michele
Maragoni, Lucio
Nothdurfter, Stefan Klaus
Rullo, Axel
Quaresimin, Marino
[J]. COMPOSITES SCIENCE AND TECHNOLOGY, 2018, 162 : 225 - 234
[5] Electrical resistance change vs damage state in cracked symmetric laminates: A closed form solution
Panozzo, Francesco
Zappalorto, Michele
Carraro, Paolo Andrea
Quaresimin, Marino
[J]. COMPOSITE STRUCTURES, 2018, 184 : 1081 - 1091
[6] Electrical resistance change method for monitoring delaminations of CFRP laminates: effect of spacing between electrodes
Todoroki, A
Tanaka, M
Shimamura, Y
[J]. COMPOSITES SCIENCE AND TECHNOLOGY, 2005, 65 (01) : 37 - 46
[7] Multi-prove electric potential change method for delamination monitoring of graphite/epoxy composite plates using normalized response surfaces
Todoroki, A
Tanaka, Y
Shimamura, Y
[J]. COMPOSITES SCIENCE AND TECHNOLOGY, 2004, 64 (05) : 749 - 758
[8] High performance estimations of delamination of graphite/epoxy laminates with electric resistance change method
Todoroki, A
Tanaka, M
Shimamura, Y
[J]. COMPOSITES SCIENCE AND TECHNOLOGY, 2003, 63 (13) : 1911 - 1920
[9] Delamination monitoring of graphite/epoxy laminated composite plate of electric resistance change method
Todoroki, A
Tanaka, Y
Shimamura, Y
[J]. COMPOSITES SCIENCE AND TECHNOLOGY, 2002, 62 (09) : 1151 - 1160
[10] Delamination identification of cross-ply graphite/epoxy composite beams using electric resistance change method
Todoroki, A
Tanaka, Y
[J]. COMPOSITES SCIENCE AND TECHNOLOGY, 2002, 62 (05) : 629 - 639

← 1 2 →