Optimization of process parameters for ultrasonic drilling of advanced engineering ceramics using the Taguchi approach

被引：24
|
作者：
Jadoun, R. S. [1 ]
Kumar, Pradeep
Mishra, B. K.
Mehta, R. C. S.
机构：
[1] Govind Ballabh Pant Univ Agr & Technol, Coll Technol, Dept Prod Engn, Pantnagar 263145, Uttar Pradesh, India
[2] Indian Inst Technol, Dept Mech & Ind Engn, Roorkee 247667, Uttar Pradesh, India
来源：
ENGINEERING OPTIMIZATION | 2006年 / 38卷 / 07期
关键词：
ultrasonic drilling; alumina-based ceramics; engineering ceramics; cutting ratio; Taguchi method; optimization;
D O I：
10.1080/03052150600733962
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effect of process parameters on the cutting ratio (ratio of material removal rate to tool wear rate) for ultrasonic drilling of alumina-based ceramics using silicon carbide abrasive was studied. The parameters considered were workpiece material, tool material, grit size of the abrasive, power rating, and slurry concentration. Taguchi's optimization approach was used to obtain the optimal parameters. The significant parameters were identified and their effects on cutting ratio were studied. The results obtained were validated by conducting confirmation experiments.
引用
收藏
页码：771 / 787
页数：17
相关论文
共 50 条
  • [21] Optimization of Cutting Parameters in Hole Machining Process by Using Multi-objective Taguchi Approach
    Kahraman, Funda
    Basar, Gokhan
    Kocoglu, Zulfu
    Yeniyil, Emre
    JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, 2018, 21 (02): : 283 - 290
  • [22] Optimization of EDM process parameters for TWR on machining of Inconel 600 superalloy using Taguchi approach
    Choudhary, Sushil Kumar
    Jadoun, R. S.
    Singh, Padam
    MATERIALS TODAY-PROCEEDINGS, 2022, 57 : 2281 - 2288
  • [23] Optimization of process parameters of small hole dry drilling in Ti-6Al-4V using Taguchi and grey relational analysis
    Prasanna, J.
    Karunamoorthy, L.
    Raman, M. Venkat
    Prashanth, Sai
    Chordia, D. Raj
    MEASUREMENT, 2014, 48 : 346 - 354
  • [24] Optimization of parameters for an aluminum melting furnace using the Taguchi approach
    Wang, Ji-Min
    Yan, Hong-Jie
    Zhou, Jie-Min
    Li, Shi-Xuan
    Gui, Guang-Chen
    APPLIED THERMAL ENGINEERING, 2012, 33-34 : 33 - 43
  • [25] Optimization of vacuum brazing process parameters in AA6061 using Taguchi method
    Lin, Huei
    Hwang, Jiun-Ren
    Fung, Chin-Ping
    JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, 2016, 10 (02):
  • [26] Optimization of Die casting process based on Taguchi approach
    Apparao, K. Ch.
    Birru, Anil Kumar
    MATERIALS TODAY-PROCEEDINGS, 2017, 4 (02) : 1852 - 1859
  • [27] Selection of Optimal Process Parameters for Minimizing Burr Size in Drilling Using Taguchi's Quality Loss Function Approach
    Gaitonde, V. N.
    Karnik, S. R.
    JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2012, 34 (03) : 238 - 245
  • [28] Fracture at the exit of the hole during the ultrasonic drilling of engineering ceramics
    Zhang, QH
    Zhang, JH
    Jia, ZX
    Ai, X
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1998, 84 (1-3) : 20 - 24
  • [29] OPTIMIZATION OF PROCESS PARAMETERS FOR WOOD LASER ENGRAVING BASED ON TAGUCHI METHOD APPROACH
    Nguyen-Thi-Ngoc, Huyen
    Dang, Thai-Viet
    MM SCIENCE JOURNAL, 2023, 2023 : 6723 - 6729
  • [30] Optimization on the Turning Process Parameters of SS 304 Using Taguchi and TOPSIS
    Rathod N.J.
    Chopra M.K.
    Chaurasiya P.K.
    Vidhate U.S.
    Dasore A.
    Annals of Data Science, 2023, 10 (05) : 1405 - 1419
12345